Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[10GBASE-T] matlab ad hoc




Participants

To get this kicked off, I suggest developing some code to compute the optimal DFE SNR.  I would like to see several participants independently develop some code.  For the purposes of testing the code only, we need to agree upon a transmit PSD, transformer, channel and noise models.   I do not want to use DSL models. I suggest something from TIA 568b or ISO 11801.  I am open to specific proposals.  For the transformer, I suggest a simple first order high pass filter with low frequency 3dB point in the range of 10 to 15 MHz.  For the simulation results I have present, I used 12.5 MHz.  For initial testing purposes, I suggest a PAM10 PSD with 10dBm power. 

I am sending this to the reflector.  But, since several people are having problems getting to the reflector, I am thinking to carry on the ad hoc via direct distribution to interested participants.  Let me know if this creates a problem for anyone.  So, I will be sending a separate email directly to those participants that have contacted me either by email or business card by the end of business today (1/16/03).  If you do not receive a second email and are interested in participating, kindly send me an email.

Also, I have just received the 1000BASE-T code from Chris which I will be distributing.

Regards

Bill

William W. Jones, Ph.D.
Director of Systems Engineering
SolarFlare Communications, Inc.
949-581-6830, ext. 2550
mobile: 619-405-2445
fax: 949-581-4695
wjones@solarflare.com