Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [10GBASE-T] precoding




Eric,

Yes, I have considered the impact of precoding on the complexity of the 
analog front end of the receiver. The important point to note is that the 
coefficients of the precoder are determined by the receiver and therefore, 
the receiver has full control over the tradeoff between the dynamic range of 
the analog front end and the amount of pre-equalization done in the 
transmitter.

Regards,
Sailesh.


>From: "Booth, Bradley" <bradley.booth@intel.com>
>To: <stds-802-3-10gbt@ieee.org>
>Subject: [10GBASE-T] precoding
>Date: Wed, 17 Dec 2003 14:08:30 -0800
>
>
>From Eric Wang...
>
>-----Original Message-----
>Date: Wed, 17 Dec 2003 14:05:02 -0800 (PST)
>From: Eric Wang <eric_r_wang@yahoo.com>
>Subject: precoding
>To: stds-802-3-10gbt@ieee.org
>Cc: sailesh_rao@hotmail.com
>
>Hi Sailesh,
>
>Have you considered the impact of precoding on the
>complexity of AFE and ADC of the receiver? It seems
>to me that their complexity and resolutioon will
>increase significantly due to larger dynamic range
>causesd by precoding.
>
>Eric
>
>

_________________________________________________________________
Tired of slow downloads? Compare online deals from your local high-speed 
providers now.  https://broadband.msn.com