Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [10GBT] Transmit power levels



No , at the time of Joseph's presentation we noted it was  not correct.  I can't answer  in  detail now (I'm on my mobile ), but we will at the meeting or before.

George A. Zimmerman
cell: 310 920 3860
(sent from my mobile)

-----Original Message-----
    From: "Sanjay Kasturia"<SKasturia@TERANETICS.COM>
    Sent: 5/13/04 1:46:33 PM
    To: "STDS-802-3-10GBT@LISTSERV.IEEE.ORG"<STDS-802-3-10GBT@LISTSERV.IEEE.ORG>
    Subject: [10GBT] Transmit power levels
      A quick scan through past presentations reveals a few different
    proposals for transmit power levels.

    http://www.ieee802.org/3/10GBT/public/mar03/babanezhad_1_0303.pdf , a
    March 2003 presentation by Joseph Babanezhad of Plato Labs, proposes 2v
    peak to peak and also has a table on slide 16 that lists other prior
    proposals: 2v peak to peak from a proposal from Cicada and 3.134v peak
    to peak for a proposal from Solarflare.

    A subsequent presentation from George Zimmerman of Solarflare,  gives a
    range of  TX power, > 6dBm to <10dBm though there is no mention of
    actual peak to peak voltages. If I assume that the 3.134v peak to peak
    corresponds to 10dBm then the 6dBm number will be about 2v peak to peak.

    Joseph, Vivek (Cicada) and George - is my interpretation of each of your
    proposals correct? Were there any other proposals on transmit power?

    Thanks,


    Sanjay

    sanjay@teranetics.com
    cell (650) 704-7686
    office (408) 653-2235