Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
IEEE 802.3 Working Group
Voters, Observers, and Liaisons:
This is the announcement of
the electronic IEEE 802.3 Working Group ballot on P802.3an, 10GBASE-T. Remember that voting as well as
attendance is a requirement to maintain your 802.3 member (voter)
status.
Instructions for accessing
the draft, casting your ballot and submitting comments follow this
announcement. As two 802.3 WG
ballots are now running in parallel (P802.3aq,
10GBASE-LRM is already open), proper subject lines on ballots and
comments are essential for your ballot and comments to be
accepted.
The project is an amendment
to IEEE Std 802.3. IEEE Std
802.3-2002 including its five amendments is the current base document. P802.3REVam is a revision that merges
the amendments into 802.3-2002 as well as including maintenance changes and
changes made during the revision process.
Because approval of P802.3REVam is expected prior to Sponsor ballot on
this project, changes to the base document are written against P802.3REVam
rather than IEEE Std 802.3-2002.
TITLE:
Draft:
Information
technology -- Telecommunications and information exchange between systems --
Local and metropolitan area networks -- specific requirements Part 3: Carrier
Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and
Physical Layer Specifications
Amendment: Physical Layer
and Management Parameters for 10 Gb/s Operation, Type
10GBASE-T
BALLOT
SCOPE:
As an initial WG ballot, the
scope of the ballot is the complete P802.3an/D2.0 draft.
BALLOT
OPEN:
Thursday, 4 April
2005
BALLOT
CLOSE:
Friday, 9 May
2005
Thank you for your
participation in this ballot and careful review of the
draft.
Bob Grow, Chair IEEE
802.3
Phone:
858-391-4622
Email:
bob.grow@ieee.org
David Law, Vice Chair IEEE
802.3
Phone: +44 (131) 659 8218
Email: david_law@ieee.org
-----------------------------------------------------------------
****INSTRUCTIONS FOR
BALLOTING ON: IEEE P802.3an/D2.0
Instructions for accessing
the ballot documents, casting your ballot and submitting comments
follow.
HOW TO ACCESS THE
DRAFT
The ballot documents are
posted for your review for balloting purposes only, and neither the documents
nor access information should be copied or redistributed to others in violation
of document copyrights. The
P802.3an/D2.0 draft may be downloaded from:
http://www.ieee802.org/3/an/private/index.html
Login:
*******
Password: ************
The P802.3REVam draft is not
within scope of this ballot, but for those wishing to review the changes to
existing clauses, the P802.3REVam/D2.1 draft (plain) may be downloaded
from:
http://www.ieee802.org/3/private/maint/am/2.1/index.html
Login:
*******
Password: **********
The documents are posted in
Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader,
it is available for free downloading from Adobe at:
http://www.adobe.com/prodindex/acrobat/readstep.html.
HOW TO CAST YOUR
BALLOT
To assure your ballot is
counted, please:
1) send your ballot to:
stds-802-3-ballot@ieee.org
2) paste the following line
into the subject field:
P802.3an/D2.0 Ballot
3) paste into the message
body and complete the ballot
form below:
-----CUT AND PASTE TEXT
BELOW THIS LINE ONLY PLEASE--------
P802.3an/D2.0 WORKING GROUP
BALLOT
Your
Name:___________________________
___ APPROVE ALL WITHOUT
COMMENT
___ APPROVE ALL WITH COMMENTS on
SOME
(All comments are non-binding)
___
DISAPPROVE
(Some or all comments are binding, a voter must
attach specific comments for remedy)
___ ABSTAIN, Lack of
Expertise
___ ABSTAIN, Lack of
Time
-----------------------end
ballot form--------------------
HOW TO SUBMIT
COMMENTS
Acceptable comment types:
E = Editorial
ER = Editorial Required
Required (a binding comment that is
part of a DISAPPROVE vote, therefore only
appropriate for an 802.3 voting member)
T = Technical
TR = Technical Required (a
binding comment that is
part of a DISAPPROVE vote, therefore only
appropriate for an 802.3 voting member)
1. Prepare your comments in
one of the following two ways:
a. You are strongly requested to use the
comment tool in the TF public area. To download:
http://www.ieee802.org/3/an/public/10GBT_WG_cmt_tool.zip
To use the tool, extract all
components into a folder and do not move any component from that folder. The tool is:
10GBT_WG_cmt_tool.EXE
b. To submit comments in text (ASCII) form,
please use the form below. This
will make it possible for the editor to properly record and track all
submissions. Make as many copies of
the template as necessary and submit as an ascii text file or as part of your
e-mail.
------CUT AND PASTE TEXT
BELOW THIS LINE ONLY PLEASE--------
CommentID: (Leave
Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCellPhone:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E, ER, T, or
TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:
--------------------end
comment template------------------
3. Send your comments to:
stds-802-3-ballot@ieee.org
and paste into the subject
line:
P802.3an/D2.0
Comments