Re: [8023-10GEPON] power budget ad hoc teleconference
Dear Robert,
This is Tsutomu Tatsuta from NTT.
In NTT (maybe in Japan), ONU is settled in customer's premises/house.
So, all of ONU is indoor type.
Sincerely yours,
Tsutomu TATSUTA
At 13:17 07/04/10, Lingle, Jr, Robert (Robert) wrote:
>When I consider the question of developing higher power DMLs at 1300nm, one
>question that comes to mind is what are the temperature requirements for the
>ONU? Can we assume indoor ONU? If not, what temperature extremes are
>appropriate?
>
>-----Original Message-----
>From: Lingle, Jr, Robert (Robert) [mailto:rlingle@OFSOPTICS.COM]
>Sent: Tuesday, April 10, 2007 12:09 AM
>To: STDS-802-3-10GEPON@listserv.ieee.org
>Subject: Re: [8023-10GEPON] power budget ad hoc teleconference
>
>
>All,
>
>The next call(s) will occur on Tuesday April 10 at 7PM EST and Wednesday
>April 11 at 9AM EST.
>
>(Because of the US time change in March, I believe that 7PM EST Tuesday is
>now 8AM Japan time on Wednesday.)
>
>Toll-free in US 866-263-8899
>Outside US 816-249-6061
>Conf. Code 7707985015
>
>The following Orlando presentations, among others, may be relevant to the
>discussions:
>
>3av_0703_effenberger_1
>3av_0703_takizawa_1
>3av_0703_jiang_1
>3av_0703_stefanov_2
>
>In the call, I would like to address the following items. Please address
>them on the Reflector prior to the call.
>
>1. Much attention has been focused on the class B++ CH IL case. The only
>proposed power budgets for PX10 and PX20 are those in
>3av_0703_effenberger_1, slides 6 and 7. Are Frank's numbers for PX10 and
>PX20 met with components available today? Or would these also require
>development as in the case of B++? Does anyone recommend any changes to
>these? If not, should we plan to adopt them at the May meeting?
>
>2. In analyzing the power budgets from effenberger and takizawa for class
>B++, it seems clear (at least to me) that the following components must be
>developed to meet the power budgets:
>
>-- US 1300nm requires the development of a NEW DML, perhaps cooled, that can
>output 3-4 dBm minimum at 1300nm, compared to a more typical 0 to 1 dBm at
>present.
>-- DS w/ APD requires a NEW EML with +3 dBm minimum output power, compared
>to a -1 to 0 dBm typical minimum output power at present.
>-- DS w/ PIN can be done with existing EML+EDFA; it MIGHT be done with
>existing SOA with Psat(1dB)=10dBm, but might require development of an SOA
>with higher Psat(1dB)=12 dBm.
>
>Robert
>
>-----Original Message-----
>From: Lingle, Jr, Robert (Robert) [mailto:rlingle@OFSOPTICS.COM]
>Sent: Tuesday, April 03, 2007 10:07 AM
>To: STDS-802-3-10GEPON@listserv.ieee.org
>Subject: [8023-10GEPON] power budget ad hoc teleconference
>
>
>All,
>
>The next Power Budget Ad Hoc teleconference will occur on Tuesday April 10
>at 7PM EST and Wednesday April 1 tentatively at 9AM EST. I may have to
>travel Wednesday and ask your flexibility if I need to push this time to
>8:30AM or 9:30AM to accomodate.
>
>The topics will be a review of power budgets presented at the March Plenary
>by Frank Effenberger and Wenbin Jiang, as well as implications of the
>presentation by Stefanov on SOA output power issues.
>
>More details will follow.
>
>Robert
>
>Robert Lingle, Jr.
>Fiber Design and Transmission Simulation
>OFS Corporate R&D, Atlanta
>404-886-3581 (cell)
>770-798-5015 (office)
**********************************
NTT アクセスサービスシステム研究所
光アクセスシステムプロジェクト
フルサービスアクセスG
立田 努
電話番号：043-211-3115（直通）
FAX番号：043-211-8875
**********************************