Jonathan,
Regarding the
questions posed:
o
Corning Cable Systems
has always favored 4 connector pair in the default physical
link
o
No position yet on
w/c set of offsets
o
I think we need to
understand both link lengths since our objectives include
both.
Cheers,
Steve
-----Original Message-----
From: Jonathan King
[mailto:jking@BIGBEARNETWORKS.COM]
Sent: Monday, August 02, 2004 11:00
PM
To: STDS-802-3-10GMMF@listserv.ieee.org
Subject: [10GMMF] Channel
Model -Task 2 - strawman standard link for 4th August conference call - Time
variation & modal noise
Time variation & modal noise
studiers
We agreed that it would be useful to have a standard
link for modeling
and experimental purposes: Here is a slide with
straw-man standard link
with characteristics which are for discussion and
comment in Wednesday's
channel model-task 2 teleconference
(The slide follows a proposal from Aronson and Fiedler
)
To be determined:
Is 4 connectors too many?
What would be a reasonable worst case series of
offsets ?
220m and/or 300m fibre ?
Any and all comments from the task force welcome at
any time !
best wishes
Jonathan
tel: 1 408 524 5110
e-mail: jking@bigbearnetworks.com
fax: 1 408 739 0568
Jonathan King
Director, Optical Systems
BigBear Networks
345 Potrero Avenue
Sunnyvale, CA 94085