Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Dear All, Enclosed you will find the experimental verification of the calculated connector loss for various fiber offsets. I used standard offset patchcord for 62,5µm fibers for fiber launch and measured the loss for several offsets of the multimode fiber. The calculation of David Cunningham for this case fits well to the measured values. Regards Joerg -----Original Message----- From: owner-stds-802-3-10gmmf@listserv.ieee.org [mailto:owner-stds-802-3-10gmmf@listserv.ieee.org] On Behalf Of David Cunningham Sent: Mittwoch, 18. August 2004 21:25 To: STDS-802-3-10GMMF@listserv.ieee.org Subject: [10GMMF] 62MMF connector loss and draft test link config Dear All, As promised on todays Fiber Channel Ad Hoc I attach a PDF file containing the following information: * My calculated graphs of connector loss versus offset for overfilled launch, steady state launch and 23 um offset single mode launch. * The agreed draft of the worst-case test configuration for channel time variation measurements with comments from our call to document our reasoning behind the chosen configuration. Regards, David
Connector Loss versus Fiber Offset.pdf