|
Dear Colleagues,
My previous email was rejected because the attached
file size was more than 100k. You can get this file (for todat task 4 telecon)
form fto site or directly from me. I also asked Piers Dawe to post it at IEEE
site.
Regards,
Gary Shaulov
Dear
Colleagues,
Please find attached the presentation by RSoft/Optium for today's task
4 telecon (see Yu Sun's email below). The power point file zipped is about
200K, so I am not sure if it go through reflector. I just put it also on
ftp site the group is using (tehran.stanford.edu, id:i 8023aq, psw: ieee3aq)
The file name is "Task4_Presentation_Rsoft_Optium_091704.ppt". If
someone will still have problem with getting the file please email to me and
I'll send you the file directly.
Regards,
Gary,
-----------------------------------------------------------
Gary
Shaulov, Ph.D.
Optical Systems
Division, tel:
914.923.2164,x127
RSoft Design Group,
Inc. fax: 914.923.2169
200
Executive Boulevard
gary@rsoftdesign.com
Ossining, NY 10562
www.rsoftdesign.com
------------------------------------------------------------
Dear
Colleagues,
This is a reminder of tomorrow’s
(9/17) task 4 group meeting. The proposed time is 11:00
am east, 8:00 am west and
4:00 pm
UK.
The agenda is listed as
following:
1.
compile
attendee
2.
go over last call
minutes
3.
presentations:
the
comparison with Cambridge data (Gary
Shaulov)
preliminary data of
PIE metrics, addressing the effect of input pulse width and fiber length.
(Yu Sun)
4.
prepare for the Ad
hoc presentation
Best regards,
Yu
Yu Sun, Ph. D
Optium Corp.
Suite 505, 500 Horizon Dr.
Chalfont, PA 18914
Ysun@optiumcorp.com
Tel: 215-712-2445
_ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_
Confidentiality Notice:
This e-mail message, including any
attachments, is for the sole use of the intended recipient(s) and contains
confidential and privileged information. Any unauthorized review, use,
disclosure, forwarding or distribution is prohibited. If you are not the
intended recipient, please contact the sender by reply e-mail and destroy
all copies of the original
message.
|