Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[10GMMF] Task 4: Calculation of pulse delays within a mode group



Title: Message
Dear Colleagues,
on the last call we discussed the possible time delay within modes of a mode group in rotational symetric fibers.
Enclosed you will find an example which demonstrates that there exists various speeds within a mode group for fiber profiles which are not ideal.
The file shows the result of a calculation of a rotational symmetric fiber with 2 exponents of a1=1,97 and a2=2,05 with the alpha change at R=17µm.
You can observe that there is no delay within a mode group for the low order modes which "see" the perfect profile, but there is calculated a large delay within a group for the mode groups 8 to 12 which travel in the area of the alpha change.
If the power distribution within a mode group changes due to the change of the launch condition it is possible to get a change in the pulse response of the fiber even in rotational symmetric fibers for this case.
Joerg 
 

Infineon Technologies Fiber Optics GmbH
MOD CE
Dr. Joerg-R. Kropp
Senior Staff Expert
Wernerwerkdamm 16
D-13629 Berlin / Germany
Phone -49-30-85400-4918
Fax     -49-30-85400-4900
Mail     joerg.kropp@infineon.com


 -----Original Message-----
From: owner-stds-802-3-10gmmf@IEEE.ORG [mailto:owner-stds-802-3-10gmmf@IEEE.ORG] On Behalf Of Yu Sun
Sent: Freitag, 29. Oktober 2004 22:40
To: STDS-802-3-10GMMF@listserv.ieee.org
Subject: [10GMMF] the minutes of task 4 call

Dear Colleagues,

 

Please find the minutes of task 4 group as the attached file. Any comments and suggestions are highly appreciated. The next task 4 meeting is scheduled as 11:00 am EST (please note the ending of day time saving), Nov 1st.

The dial in information is

 

# 1-888-296-6500

ID: 188249

 

Best regards,

 

Yu

 

 

 

Time Delay of Modes within a Mode Group.pdf