RE: Proposed WAN vs. LAN Terms (Ethernet HSSG)
- To: "'bgregory@xxxxxxxxx'" <bgregory@xxxxxxxxx>, BRIAN_LEMOFF@xxxxxxxxxxxxxxxxxxxxxxxxxx
- Subject: RE: Proposed WAN vs. LAN Terms (Ethernet HSSG)
- From: "Buckman, Lisa" <lbuckman@xxxxxxxxxxxxxxx>
- Date: Wed, 12 May 1999 16:38:56 -0700
- Cc: stds-802-3-hssg@xxxxxxxx, xclairardin@xxxxxxxxx, twhitlow@xxxxxxxxx
- Sender: owner-stds-802-3-hssg@xxxxxxxxxxxxxxxxxx
Bryan,
In response to this comment you made:
"I've heard a number of individuals state
that a directly modulated 10 Gb laser is possible. Lucent seemed to be
proposing this at the Austin meeting (I believe their eye pattern was from
one
of these devices). If this was a directly modulated uncooled DFB without
isolator, then I believe it would be by far the lowest cost and the most
straight forward."
Just wanted clarify that the directly modulated, uncooled DFB that Lucent
discussed at the Austin meeting, DOES have an isolator. I clarified this
with Lucent after their presentation. The directly modulated, uncooled FP
that they discussed does not have an isolator.
Lisa Buckman
Hewlett-Packard Laboratories
lbuckman@xxxxxxxxxx
-----Original Message-----
From: bgregory@xxxxxxxxx [mailto:bgregory@xxxxxxxxx]
Sent: Monday, May 10, 1999 2:34 PM
To: BRIAN_LEMOFF@xxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: stds-802-3-hssg@xxxxxxxx; xclairardin@xxxxxxxxx; twhitlow@xxxxxxxxx
Subject: Proposed WAN vs. LAN Terms (Ethernet HSSG)
Hi All,
Just a quick question, is there a "term" defined for the very long reach
version
of 10GEth? These definitions seem to be important to our discussion. As
Brian
from HP stated, we're not being clear on the specific application
environment.
I'd suggest something like:
10,000Base-SX
Multi-mode
Wavelength ~ 850nm
I'd guess WWDM only
300m reach over 62.5um fiber
10,000Base-LX
Single-mode (maybe also multi-mode)
Wavelength ~ 1310nm or 1550nm
WWDM, Serial or MAS
10km reach
10,000Base-EX (EX=Extended Length)
Single-mode
Wavelength ~ 1550nm
DWDM or Serial
Externally modulated
Long Reach
(similar to what Bill St. Arnaud is talking about)
Also, I've seen some comments on the serial version of the 10,000Base-LX
that
assume it'll be externally modulated. I've heard a number of individuals
state
that a directly modulated 10 Gb laser is possible. Lucent seemed to be
proposing this at the Austin meeting (I believe their eye pattern was from
one
of these devices). If this was a directly modulated uncooled DFB without
isolator, then I believe it would be by far the lowest cost and the most
straight forward. Regarding the 10,000Base-EX, I'd (obviously) assume that
this
was only externally modulated.
Regards,
Bryan Gregory
bgregory@xxxxxxxxx
630/512-8520