Re: Please help to clarify some things!
Mick,
The splice points are just physical joinings of the fiber. The problem is that
they can be inconsistent to the point of effecting the functionality of the data
transmission. They can also be effected by people messing with them in the
process of working on the fiber cable. As a cable degrades or is damaged the
link level may fail to the point of not being able to use "ping", yet the remote
status information can inform you of whether the problem is in both directions
of the traffic, or just one, and which one. A ping can not tell you if the link
failed in one direction only. As a transmission laser starts to fail, the remote
system returning its receive status information can cause an allert/trap against
the local system, even though the problem was seen on the remote system. At
present, SNMP can only tell you if there are excessive error frames. It does
not have visibility at the optical level. Having a network management system be
able to properly report where the problem is will save a lot of time, effort,
and expensive support people in the process of resolving the problem. Part of
what I am recommending is adding to SNMP the visibility to the optical level.
Thank you,
Roy Bynum
MCI WorldCom
Mick Seaman wrote:
> Roy,
>
> I'm sorry, I feel you are repeating "full duplex 10Gb 802.3 is in need of
> protocol
> level operations support functionality" but not adding to my understanding
> of why at all. I am probably not alone.
>
> Can we be more specific about those things that the functionality you
> propose will enable us to diagnose that can not be accomplished by
> collecting data in the systems attached to the Gigabit MAC and then sharing
> that data or responding to queries using that MAC to transmit and receive.
>
> Is it possible to see or manage the splice points you refer to using an
> embedded protocol? I thought they were just physical splice points and that
> none of the protocols you were discussing contained embedded OTDR. So the
> only thing that would help me to manage these would be better insight into
> BER or 'physical' level signal conditioning at the end stations. Why can't I
> get at the information provided by this using SNMP, or check connectivity
> using 'ping' etc. etc. What is there here that needs support in the MAC? It
> may be that the world needs better management protocols but why is that a
> subject for HSSG discussion?
>
> Mick
>
> From: owner-stds-802-3-hssg@xxxxxxxxxxxxxxxxxx
> [mailto:owner-stds-802-3-hssg@xxxxxxxxxxxxxxxxxx]On Behalf Of Roy Bynum
> Sent: Sunday, August 29, 1999 10:24 PM
> To: Henry Ngai
> Cc: stds-802-3-hssg@xxxxxxxx
> Subject: Re: Please help to clarify some things!
>
> Henry,
>
> In your document, your first and second drawings are somewhat correct. I
> doubt
> that 10GbE would ever be implemented as you are showing it in your third
> drawing. In your first drawing, you need to add a fiber plant that has
> things
> like splice points every 5 km at most, access to the fiber cable by people
> that
> have nothing to do with your data, and other issues. The traditional 802.3
> LAN
> environment was outgrown when full duplex 802.3 over optical transport was
> standardized. It is even possible to take full duplex 100BaseFX over WAN
> distances with optical converters that are sold by several different
> vendors.
> As seen by individuals that are attempting to create manageable enterprise
> level data networks with GbE, full duplex 10Gb 802.3 is in need of protocol
> level operations support functionality in order to grow to its true
> potential.