Re: Clause 48 Comments
Boaz,
I realize that a response to this note is long overdue, but I'm finally
getting back to it. Here are my responses to your clause 48 comments.
Boaz Shahar wrote:
>
> Section 48.2.4.3 P.135
> f) I think it Should be: ...The error code group is converted to XGMII Error
> control character
Done.
> Figure 48-5
> Is not coordinated with the machine in Fig. 48-7
> In Fig. 48-5, if Cose_sel=1 its either /A/ or /R/.
> In the machine in Fig. 48-7, if A_CNT_0, then its /A/, regardless of the
> value of Code_Sel (I think that the description in the machine is the
> accurate one)
> I assume you ment that /K/ is transmitted when code-sel=0. This also should
> be fixed.
Done.
> Figure 48-7 (PCS Transmit state diagram):
> I think that there should be no dependency in A_CNT_0 for the first IPG
> column. If code_sel=0 Tx /K/, if code-sel=1 transmit /A/
> Fix the values of code-sel in th exits from SEND_RANDOM_R and SEND_RANDOM_K
> states
Done.
> Boaz
--
Best Regards,
Rich
-------------------------------------------------------
Richard Taborek Sr. Phone: 408-845-6102
Chief Technology Officer Cell: 408-832-3957
nSerial Corporation Fax: 408-845-6114
2500-5 Augustine Dr. mailto:rtaborek@xxxxxxxxxxx
Santa Clara, CA 95054 http://www.nSerial.com