RE: RS minimum IPG
Sanjeev,
Where do you find such a definition in the standard? I don't know of
anyplace a minimum receive IPG of 5 is stated. Further, that is a parameter
that has varied based on speed so what it was at 100/1000 Mb/s does not
limit our choice at 10 Gig.
Regards,
Pat
-----Original Message-----
From: Sanjeev Mahalawat [mailto:sanjeev@xxxxxxxxx]
Sent: Monday, February 19, 2001 11:25 AM
To: stds-802-3-hssg@xxxxxxxx; yariv@xxxxxxxxxxxxx
Subject: Re: RS minimum IPG
The min IPG varies from 9 bytes to 15 bytes
based on the packet size and due to clock compensation
the PHY may delete a column that will lead to min
IPG of 5 Bytes. So, thoeritically it should not be
less than 5 bytes but the spec. always defines it
to be 4 bytes as this was in the 100/1000 mbps
specs.
Thanks
-Sanjeev