Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3ae] FW: I-D ACTION:draft-ietf-hubmib-wis-mib-00.txt

Please see the following Internet-Draft from the IETF Ethernet Interfaces
and Hub MIB WG. Question or comments are welcome on the WG list at
hubmib@xxxxxxxx

Regards,

Dan


-----Original Message-----
From: Internet-Drafts@xxxxxxxx [mailto:Internet-Drafts@xxxxxxxx]
Sent: Tuesday, July 03, 2001 12:56 PM
To: IETF-Announce; @loki.ietf.org@xxxxxxxxxxxxxxxxxx
Cc: hubmib@xxxxxxxx
Subject: I-D ACTION:draft-ietf-hubmib-wis-mib-00.txt


A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Ethernet Interfaces and Hub MIB Working
Group of the IETF.

	Title		: Definition of Managed Objects for the Ethernet WAN

                          Interface Sublayer
	Author(s)	: M. Ayers et al.
	Filename	: draft-ietf-hubmib-wis-mib-00.txt
	Pages		: 25
	Date		: 02-Jul-01
	
This document defines a portion of the Management Information Base
(MIB) for use with network management protocols in TCP/IP based
internets.  In particular, it defines objects for managing the Wide
Area Network (WAN) Interface Sublayer (WIS) for Ethernet systems
which support it.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-hubmib-wis-mib-00.txt

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-hubmib-wis-mib-00.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@xxxxxxxxx
In the body type:
	"FILE /internet-drafts/draft-ietf-hubmib-wis-mib-00.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

ATT61241.txt

<ftp://internet-drafts/>
Transfer-mode: ftp.ietf.org