Thread Links			Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

[802.3ae] XAUI sinusoidal jitter tolerance

To: stds-802-3-hssg@xxxxxxxx, Qicheng Yu <qiyu@xxxxxxxxxx>
Subject: [802.3ae] XAUI sinusoidal jitter tolerance
From: Qicheng Yu <qiyu@xxxxxxxxxx>
Date: Tue, 07 Aug 2001 11:32:32 -0400
Sender: owner-stds-802-3-hssg@xxxxxxxxxxxxxxxxxx


Dear Editor,

I have a question regarding XAUI sinusoidal jitter tolerance as
specified in Figure 47-11 of the standard. Is the vertical axis for
"amplitude of the sine" or "peak-to-peak"? The reason I ask is that
somewhere else in the standard, in Figure52-13 (for 10GBASE-R), the
vertival axis is labeled "peak-to-peak amplitude" meaning actually
"peak-to-peak".

Thanks for your attention.

Qicheng Yu

Silicon Laboratories, Inc.

Prev by Date: RE: [802.3ae] Clause 46.3.1.4 Draft 3.1
Next by Date: [802.3ae] Clause 46.3.1.4 Draft 3.1
Prev by thread: [802.3ae] request for information
Next by thread: RE: [802.3ae] XAUI sinusoidal jitter tolerance
Index(es):
- Date
- Thread