| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Gareth,
I agree with Anwar's comments.
...Dave
David W. Martin
Nortel Networks
phone: +1 613 765-2901 (esn 395)
fax: +1 613 765-0769 (esn 395)
email: dwmartin@xxxxxxxxxxxxxxxxxx
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: anwar.shahab@xxxxxx [mailto:anwar.shahab@xxxxxx]
Sent: Monday, July 08, 2002 1:50 AM
To: Gareth.Edwards@xxxxxxxxxx
Cc: stds-802-3-hssg@xxxxxxxx
Subject: [802.3ae] WIS defect conditions
Hi Gareth,
I'm putting in my comments on your queries.
>
>
> We'd like to check people's interpretation of the ANSI T1.416-1999
> specification referenced by IEEE 802.3ae with respect to WIS. In
> particular, we have some confusion about a number of the defect
> coniditions.
>
> In section 7.5 of ANSI T1.416-1999, Path AIS is defined as "an all ones
> signal in H1, H1*, H2, H2*, H3 and the entire SPE". Does the SPE need
> to be all ones for the whole frame to be classed as a path AIS frame,
or
> can one just assume that if all the header bytes are all ones, then
this
> is path AIS?
SPE also needs to be all ones for the interpretation of PAIS frame.
It is very clear and has been implemented in many designs.
>
> In section 7.4.1 of ANSI T1.416-1999, Line AIS is defined as a "signal
> containing a valid SOH with bits 6, 7 and 8 of the K2 byte set to 111,
> and a scrambled all-ones pattern for the remainder of the signal".
Does
> the remainder of the signal mean the whole frame is all ones, apart
from
> SOH (and therefore including K2[6:8] as this is in line overhead), or
is
> it just referring to the SPE?
POH and the complete payload needs to be all ones.
>
> In section 7.3 of ANSI T1.416-1999, SEF defect is defined... very
> badly! According to this spec, the occurrence of four or five
> consecutive errored frame alignment words will cause that frame to be
> marked as SEF. However, two consecutive error-free frame alignment
> words will terminate the error. If that is the case, then if ten error
> frame alignment words are detected, followed by ten error-free frame
> alignment words, then this would mean that the frame is no longer in
> error, because the error is terminated. Correct? This seems very
> strange to me, and I can't believe it is correct.
We've implemented it successfully in our designs. I do not know
why you're finding it strange. Its a simple thing which which can
be taken care of by a simple state machine.
Even in your example (Ten errored and ten error free) u're stating the
things correctly. Pls elaborate more on this query.
>
> If anybody can clear any of these issues up for us, that would be
> excellent.
>
> Cheers
> Gareth
>
Rgrds.
ANWAR SHAHAB
Sr. Design Engineer
ST Microelectronics
Sector 16 A, Noida
INDIA -201301
Tel:4515262-71 Extn: 6839
Email:anwar.shahab@xxxxxx