RE: 10GBase-LR/LW Supporting 1550 nm
Ali,
I think interop between 1310 and 1550 would be extremely useful. Does
anybody have any precise numbers for responsivity in the two ranges? It
would be advisable to quantify this and determine any impact on overload,
BER, etc.
Regards,
Jugnu Ojha
Caspian Networks
(408)382-5213
-----Original Message-----
From: Ali Ghiasi [mailto:aghiasi@xxxxxxxxxxxxx]
Sent: Wednesday, April 11, 2001 7:01 PM
To: Serial; stds-802-3-hssg-serialpmd@xxxxxxxx
Cc: Ali Ghiasi
Subject: 10GBase-LR/LW Supporting 1550 nm
Hi
Last week during the serial PMD call I suggested possible need for
Interoperability between 1550 and 1310 nm. I was asked to write a
short description.
MY intention was if you have a 1550 nm source assuming you met overload
for the 1300 nm receiver you are allowed to operate with 10GBase-LR/LW
over 10 Km. If we look at Table 52-13 the wavelength range currently
specified from 1265-1355 nm. Without adding any burden we can
define a second window around 1550 nm to allow use of 1550 nm lasers
with 10GBase-LR/LW. InGaAs/InP detector sensitivity is nearly flat
in this region and it may only require to specify dual wavelength AR
coating, which is already very common.
Thanks,
Ali Ghiasi << File: Card for Ali Ghiasi >>