[802.3ae_Serial] Cable plant values?
Questions
-
1. Table 52-25
quotes 3.5 dB/km max attenuation at 850nm, whereas the spreadsheet uses 3.75.
10GFC also quotes 3.75 in its documentation. Which value is correct?
All 3
sources agree on 3.5 dB for 50 micron fiber.
2.
Table 52-24
shows channel insertion losses. Can someone explain where the values come from
for the 850 nm variants? Except for 2000 MHz-km, I get significantly
different values. The values in the table are not consistent with the model nor
with the budget tables for the PMDs.
Thanks,
Tom
Stratos NW
(425) 672-8035
x105
BEGIN:VCARD
VERSION:2.1
N:Lindsay;Tom
FN:Tom Lindsay
ORG:Stratos Lightwave;Opto NW
TITLE:Prin. Engr.
NOTE;ENCODING=QUOTED-PRINTABLE:Home: lindsayta@xxxxxxx=0D=0A=0D=0Aom
TEL;WORK;VOICE:(425) 672-8035 x105
TEL;HOME;VOICE:(425) 775-7013
TEL;CELL;VOICE:(206) 790-3240
TEL;WORK;FAX:(425) 672-8014
ADR;WORK;ENCODING=QUOTED-PRINTABLE:;;6100 219th Street SW=0D=0ASuite 520;Mountlake Terrace;WA;98043
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:6100 219th Street SW=0D=0ASuite 520=0D=0AMountlake Terrace, WA 98043
EMAIL;PREF;INTERNET:tlindsay@xxxxxxxxxxxxxxxxxxxx
REV:20020219T195001Z
END:VCARD