Serial PMA/PMD delay limits
Serial PMD-ers,
You may not have noticed a criterion for the PMA or PMD hiding in clause 44,
which isn't helpful!
We need to air this (delay maximum) in the PMD tracks and add
cross-references in clauses 51, 52 and 54.
As to table 44-2, saying that "Serial PMD ... Includes serial PMA and PMD,
..." is wrong, surely? Should that read "Serial PHY ... Includes serial PMA
and PMD, ..." ?
Piers
> -----Original Message-----
> From: pat_thaler@agilent.com [mailto:pat_thaler@agilent.com]
> Sent: 27 March 2001 21:51
> To: boazs@mysticom.com; stds-802-3-hssg@ieee.org
> Subject: RE: Clause 48 Questions
>
>
> Boaz,
>
> There is a difference between the delay specified in prior
> drafts which was
> for MDI to XGMII and the delay specified here which is only
> the delay of a
> single PCS or a single XGXS. The old delay therefore included
> the PMD delay
> which now has a separate 512 bits round trip allocated. ....