[802.3_1TPCE] FW: [STDS-802-3] Invitation to join Sponsor Ballot group for IEEE P802.3bp, IEEE P802.3bq, IEEE P802.3br and IEEE P802.3by
Colleagues,
If you wish to join the sponsor ballot pool and be able to vote on the
sponsor ballot drafts, you must join the ballot pool by 15 November.
Regards,
Steve
Steven B. Carlson
Chair, IEEE P802.3bp 1000BASE-T1 PHY Task Force
http://www.ieee802.org/3/bp/index.html
Chair, IEEE P802.3bw 100BASE-T1 PHY Task Force
http://www.ieee802.org/3/bw/index.html
Executive Secretary, IEEE 802.3 Ethernet Working Group
http://www.ieee802.org/3/index.html
President
High Speed Design, Inc.
Portland, OR
scarlson@xxxxxxxxxxxxx
-----Original Message-----
From: Law, David [mailto:dlaw@xxxxxxx]
Sent: Sunday, October 18, 2015 1:20 AM
To: STDS-802-3@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3] Invitation to join Sponsor Ballot group for IEEE
P802.3bp, IEEE P802.3bq, IEEE P802.3br and IEEE P802.3by
Dear Colleagues,
Draft standards within the IEEE 802.3 Ethernet Working Group pass through
two balloting stages, first through IEEE 802.3 Working Group Ballot, then
through Sponsor Ballot. If you wish to take part in the Sponsor Ballot of
the IEEE P802.3bp 1000BASE-T draft, the IEEE P802.3bq 25G/40GBASE-T draft,
the IEEE P802.3br Interspersing Express Traffic (IET) draft, or the IEEE
P802.3by 25G/s Ethernet draft, please follow the instructions found below.
Please ensure you do this before the deadline to join at 23:59 ET on
15-NOVEMBER-2015.
Please also note that due to the decision to send IEEE P802.3br
Interspersing Express Traffic (IET) out to a second Working Group ballot,
this will be the second opportunity to join the IEEE P802.3br Interspersing
Express Traffic (IET) sponsor balloting group. If you joined last time you
do not need to join again. If you not sure if you already joined just follow
the instructions below, if you have, in step 3 you will see the options
'update, remove' rather that the option 'join'.
If you have any questions, please contact me.
Best regards,
David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx
ENROLLMENT INSTRUCTIONS
-----------------------
To participate, you must have access to myProject through an IEEE Web
Account <http://www.ieee.org/about/help/my_account/web_account.html>. This
is the same IEEE Web Account you would use to access the IEEE attendance
tool.
If you are an IEEE-SA member:
Follow this process:
1. Log onto myProject; click the link for myBallot
<https://development.standards.ieee.org/my-site/home>.
2. Click the link for "Show/Join Open Ballot Invitations"
<https://development.standards.ieee.org/my-site/open-ballot-invitations>.
3. Scroll down until you find the project you are interested in sponsor
balloting; then scroll over to the right margin and click "join" under the
"Actions" column. If you cannot see the project please check the 'Show All
Open Ballot Invitations' box. If you see the options 'update, remove' rather
than 'join' this means that you are already a member of the Sponsor Ballot
group for that project.
4. Enter or select an affiliation from the drop down menu (appearing as you
key in your affiliation in the Organization window), select your
classification category, and click "OK" at the bottom of the screen. You
will receive an on-screen confirmation that you successfully joined the
group.
If you are not an IEEE SA Member:
You can either enroll in a single ballot by paying a per ballot fee or you
can join the IEEE SA by choosing an option link below. Joining the IEEE SA
entitles you to participate in as many sponsor ballots as you like for the
year.
OPTION 1 - I am already an IEEE Member and I want to add Standards
Association Membership. Go to:
<http://www.ieee.org/membership_services/index.html>
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and
IEEE Standards Association. Go to:
<http://www.ieee.org/membership_services/membership/join/index.html>.
OPTION 3 - I am not interested in becoming an IEEE Member, however I would
like to enroll as a Standards Association Member only. Go to:
<http://standards.ieee.org/sa-mem/join.html>
If you are interested in paying a per ballot fee please contact
<David_Law@xxxxxxxx>.
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
---------------------------------------------
Once the document is ready to be balloted, you will receive notification via
email. You will typically have 30 days to review the document and return the
ballot with your vote. By agreeing to participate in this ballot you have an
*obligation* to respond. Failure to return a completed ballot may disqualify
you from participating in future ballots.