Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-3-25G] IEEE P802.3by/D2.0 25 Gb/s Ethernet Working Group initial ballot

Dear Task Force Participants,

With this e-mail, I'd like to announce the start of the IEEE P802.3by/D2.0 25 Gb/s Ethernet Working Group initial ballot.

Open date: Saturday 18th July 2015
Close date: Sunday 16th August 2015 23:59 AOE

As stated in the announcement below, the ballot group for this draft is the IEEE 802.3 voting membership as of Friday 17th July 2015. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot.

Best regards,
Mark Nowell
Chair, IEEE P802.3by 25 Gb/s Ethernet Task Force 

--

Dear Colleagues,

This is the announcement of the electronic IEEE 802.3 Working Group Initial ballot on the amendment IEEE P802.3by 25 Gb/s Ethernet. Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. The ballot group for this draft is the IEEE 802.3 voting membership as of Friday 17th July 2015.

BALLOT SCOPE:
As a Working Group initial ballot, the scope of the ballot is the complete IEEE P802.3by draft.

FIVE CRITERIA:
One of the responsibilities as a balloter is to ensure that draft is consistent with the 5 Criteria responses which are available at <http://ieee802.org/3/by/P802_3by_CSD.pdf>. An Approve vote indicates your agreement that the draft is consistent with the 5 Criteria responses.

BALLOT OPEN:
Saturday 18th July 2015

BALLOT CLOSE:
Sunday 16th August 2015 23:59 AOE

The Project Authorization Request for this Amendment is available at <http://ieee802.org/3/by/P802_3by_PAR_approved_121214.pdf> and includes the following:

TITLE:
Standard for Ethernet Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for 25 Gb/s Operation

SCOPE OF PROJECT:
This amendment defines Ethernet Media Access Control (MAC) parameters, physical layer specifications, and management parameters for the transfer of Ethernet format frames at 25 Gb/s for server to switch interconnections

NEED FOR THE PROJECT:
There is a need for greater than 10 Gb/s Ethernet connectivity for server to switch connections. The availability of 25 Gb/s signaling technologies enables interconnect solutions for server to switch applications to be developed which are lower cost than existing 40 Gb/s Ethernet solutions

Thank you for your participation in this ballot and careful review of the draft.

David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729

Mark Nowell
Chair, IEEE P802.3by 25 Gb/s Ethernet Task Force
Phone: +1 613 852 7290

----------------------------------------------------------------

INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3by draft D2.0

Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.

HOW TO ACCESS THE DRAFT
The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

The IEEE P802.3by 25 Gb/s Ethernet draft D2.0 may be downloaded from:

Username: <Please use the IEEE 802.3 or IEEE P802.3by username>
Password: <Please use the IEEE 802.3 or IEEE P802.3by password> 

This document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from:



HOW TO CAST YOUR BALLOT

To assure your ballot is counted, please:

1) Send your ballot to: stds-802-3-ballot@xxxxxxxx

2) Paste the following line into the subject field:

IEEE P802.3by 25 Gb/s Ethernet D2.0 ballot


3) Paste into the message body and complete the ballot form below:

-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

IEEE P802.3by 25 Gb/s Ethernet D2.0 ballot

Your Name:___________________________
___ APPROVE ALL WITHOUT COMMENT
___ APPROVE ALL WITH COMMENTS on SOME
       (All comments are non-binding)
___ DISAPPROVE
       (Some or all comments are binding; a voter must attach specific comments for remedy)
___ ABSTAIN, Lack of Expertise
___ ABSTAIN, Lack of Time
-----------------------end ballot form--------------------

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

1. Prepare your comments in one of the following two ways:

a. You are STRONGLY REQUESTED to use the comment tool at the URL:


To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:

Comment_Tool_Generic_Solution.exe

b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use the comment tool above if possible.
------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

CommentID: (Leave Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCellPhone:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E, ER, T, or TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:

--------------------end comment template------------------

2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:

IEEE P802.3by 25 Gb/s Ethernet D2.0 comments

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE P802.3by%2025%20Gb/s%20Ethernet%20D2.0%20comments>