Hi Stephan,
Thanks you very much for the data.
Regarding the transformers: It is close to what we have, the difference between max and min is higher, The p2punb=~7% compared to ~4% of what we have now but make sense.
Regarding the connector data: Is this only Jack data or full connector i.e. plug + Jack?. I am asking due to summary slide where you mentioned the Jack in the not below.
Are you going to present this in the meeting? Ig not, I would like you to present it in the nearest adhoc meetings if possible.
Regards
Yair
From: Steinke, Stephan [mailto:Stephan.Steinke@xxxxxxxxx]
Sent: Friday, July 11, 2014 5:23 PM
To: STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: [802.3_4PPOE] Test results - End to End Channel Pair to Pair Unbalance Ad Hoc
Hi all,
I got some more resistance unbalance test data:
1: Typical PoE+ Ethernet transformer
2: Low resistance (= worst case for the model) RJ-45 connector
Best Regards
Stephan Steinke
Principal Engineer
Molex
Connectivity
GmbH
Gewerbestrasse 60
75015 Bretten-Gölshausen
Germany
Tel: +49 7252 9496-428
Mobile: +49 173 308 7234
Fax: +49 7252 9496-401
www.molex.com
Molex Connectivity GmbH, Bretten
Amtsgericht Mannheim, HRB 240629
Geschaeftsfuehrer: Andreas Vogt, John Newkirk