| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Happy New Year, Christian! Your comment definitely identifies a terminology concern. However, since the “power channel” that you are proposing to define is essentially the same as the “data channel”, I think that adding this term may
be confusing. As an alternate solution, how would the group feel about performing a maintenance request to change the current definition of “channel” to “frequency channel” as in:
1.4.xxx frequency channel: In 10BROAD36, a band of
frequencies dedicated to a certain service transmitted on the broadband medium. (See IEEE Std 802.3, Clause 11.) Note, that occurrences of the word “channel” in Clause 11 may also need to be replaced with “frequency channel”. And, revising the existing definition of channel as follows:
1.4.134 channel:
Within Clause 33 and its annexes, the electrical path on which the power is transferred, i.e. the link section. I suspect that it might be necessary to extend the definition of channel to other Clauses besides 33, but I just wanted to get the idea out there for consideration. All the best - Val Valerie Maguire, BSEE Global Sales Engineer 602-228-7943 mobile www.siemon.com DISCLAIMER: Siemon makes every attempt to ensure that the content of materials presented or communicated to you is accurate. The content herein is for informational purpose only and Siemon assumes
no responsibility or obligation for actions resulting from this content unless otherwise agreed to in writing and signed by both parties. From: Christian BEIA [mailto:christian.beia@xxxxxx]
Hi all, I prepared a short baseline document in support of comment #26, which addresses my action item in the TDL. Please review and comment. Thanks Christian
|