Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Chris, I’m sorry you felt some constraints in the discussions at the last ad hoc call. I 100% agree with you that the goal of the meetings is to foster discussion. I don’t have any recollection of that particular meeting being one where I was
needing to limit discussion but of course it happens. When we set up these meetings we have no idea how many people will request a presentation slot. We try to judge meeting engagement when we announce the meeting duration. But have no control on how many requests we receive. We ask each
presenter for their requested time allocation. Then within the meetings we aim to balance the time each presentation has so as not to squeeze out later presentations in the agenda by running out of time. That would be unfair to someone who has put in the
time and effort to pull together a contribution. It is not an exact science as you know. And requires quite a bit of judgement to attempt to balance all presenters with their time to present and allow participants their time to discuss. On some meetings this is easy, and others very
difficult. I really have no recollection of what you are talking about below though. I think we spent the first hour on Mike’s presentation and Q&A (request time was 20 mins). Some of that time was lost due to Mike dealing with a power cut at home but I
can imagine that around an hour for one presentation I was starting to be aware that the other presenters needed to have their fair time to present and may have started trying to wrap things up. I don’t think anyone would have objected to going back to Mike’s Q&A after we finished out the other two presentations (which again both exceeded requested time with lots of discussion). I frankly didn’t think of it but would have been
open to the suggestion to go back to Mike’s topic if anyone had asked. Mark To unsubscribe from the STDS-802-3-B400G list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G&A=1 |