Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_EXTND_EPON] P802.3bk draft D1.0 Task Force review (proposed responses)



Dear colleagues,

 

Thanks to the quick and diligent work of our Task Force Editor, the proposed responses to all 85 received comments are now available at http://www.ieee802.org/3/bk/comments/8023bk_D10_proposed.pdf.

 

Kindest regards

Marek Hajduczenia, PhD

Chair, IEEE P802.3bk Extended EPON Task Force, http://www.ieee802.org/3/bk/index.html  
 
ZTE Portugal
Standard Development and Industry Relations
Edifício Amoreiras Plaza,
Rua Carlos Alberto da Mota Pinto, nr. 9 - 6 A,
1070-374 Lisbon, Portugal
 
Office: +351 213 700 090
Fax: + 351 213 813 349
Mobile: +351 961 121 851 (Portugal)

From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxx]
Sent: 10 July 2012 15:07
To: 'STDS-802-3-EXTND-EPON@xxxxxxxxxxxxxxxxx'
Subject: P802.3bk draft D1.0 Task Force review (closed)

 

Dear colleagues,

 

The Task Force review on draft P802.3bk D1.0 is now closed. I would like to thank all people who took the time to read through the draft and comment on it.

 

We received in total 85 comments, which are available for your review at http://www.ieee802.org/3/bk/comments/8023bk_D10_received.pdf. The graph below shows distribution of comments to individual clauses.

 

Out of these 85 comments, we have:

 

-          E comments: 23

-          T comments: 51

-          ER comments: 7

-          TR comments: 4

 

The Editor will now work on the proposed responses, which I hope to have available for publication by Thursday EBD to allow everyone to download them before leaving for San Diego.

 

Kindest regards

Marek Hajduczenia, PhD

Chair, IEEE P802.3bk Extended EPON Task Force, http://www.ieee802.org/3/bk/index.html  
 
ZTE Portugal
Standard Development and Industry Relations
Edifício Amoreiras Plaza,
Rua Carlos Alberto da Mota Pinto, nr. 9 - 6 A,
1070-374 Lisbon, Portugal
 
Office: +351 213 700 090
Fax: + 351 213 813 349
Mobile: +351 961 121 851 (Portugal)

 

From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxx]
Sent: 05 June 2012 06:08
To: STDS-802-3-EXTND-EPON@xxxxxxxxxxxxxxxxx
Subject: [802.3_EXTND_EPON] P802.3bk draft D1.0 Task Force review
Importance: High

 

Task Force Review Announcement
 
TO: IEEE P802.3bk participants
 
Dear Colleagues:
 
This is the announcement of the electronic IEEE 802.3bk Task Force first review on IEEE P802.3bk Extended EPON draft D1.0. Instructions for accessing the draft and submitting comments follow this announcement.
 
IEEE P802.3bk is an amendment to the IEEE Std 802.3-2008 which is available through the Get802 program at the URL http://standards.ieee.org/getieee802/802.3.html. 
 
The Project Authorization Request for this amendment is posted at http://www.ieee802.org/3/bk/P802.3bk.pdf and includes the following:
 
TITLE: IEEE Standard for Information technology--Telecommunications and information exchange between systems—Local and metropolitan area networks--Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical Networks 
 
SCOPE:
The scope of this project is to amend IEEE Std 802.3 to add at least one physical layer specification, possibly optical power budget extenders, and management parameters necessary for Ethernet Passive Optical Networks (EPON) to support optical loss budgets in excess of those specified in IEEE Std 802.3-2008 (Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks—Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications) and IEEE Std 802.3av-2009 (Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications, Amendment 1: Physical Layer Specifications and Management Parameters for 10 Gb/s Passive Optical Networks).
 
PURPOSE:
The purpose of this project is to extend the optical loss budgets supported by Ethernet Passive Optical Networks to support higher density and longer reach applications, while optimizing costs of ownership.
 
NEED FOR THE PROJECT:
The project is needed to enable broadband service providers to utilize Ethernet Passive Optical Networks (EPON) at longer reach, higher split ratios or both for more cost-effective scaling. The project will allow for the expansion of the EPON service area and reduced cost per subscriber. Additional benefits include reduction of the footprint and power consumption of central office equipment, as well as minimization of service upgrade and fiber deployment costs, while increasing customer density per central office and allowing central office consolidation.
 
REVIEW SCOPE:
As a first Task Force review, the scope of the review is the entire D1.0 Draft.
 
REVIEW OPEN:
Monday, June 4, 2012
 
REVIEW CLOSE:
Monday, July 9, 2012 11:59PM AOE (http://en.wikipedia.org/wiki/Anywhere_on_Earth and http://www.worldtimezone.com/time/wtzresult.php?CiID=42242) 
 
Thank you for your participation in this review and careful review of the draft.
 
Marek Hajduczenia, Chair, IEEE P802.3bk Extended EPON Task Force
Email: marek.hajduczenia@xxxxxx 
 
Susumu Nishihara, Editor-in-Chief, IEEE P802.3bk Extended EPON Task Force
Email: nishihara.susumu@xxxxxxxxxxxxx 
 
----------------------------------------------------------------
 
INSTRUCTIONS FOR REVIEWING ON: IEEE P802.3bk draft D1.0
 
Instructions for accessing the REVIEW documents and submitting comments follow.
 
HOW TO ACCESS THE DRAFT
 
The draft is posted for TF review purposes only, and neither the draft nor access information should be copied or redistributed to others in violation
of document copyrights. 
 
The IEEE P802.3bk Extended EPON draft D1.0 may be downloaded from the following URL: http://www.ieee802.org/3/bk/private/P8023bk_D10.pdf
The username and password were distributed at the last meeting. If you do not have a copy, please send email to marek.hajduczenia@xxxxxx requesting the access information. 
 
The document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is
available for free downloading from Adobe at the following URL: http://www.adobe.com/prodindex/acrobat/readstep.html
 
 
HOW TO SUBMIT COMMENTS
 
Please download and read the Comment Tool Tutorial in the TF public area at the URL: http://www.ieee802.org/3/bk/public/1205/8023bk_1205_diab_1.pdf 
 
Acceptable comment types:
 
E = Editorial
ER = Editorial Required (an Editorial comment that the commenter feels very strongly about)
T = Technical
TR = Technical Required (a Technical comment that the commenter feels very strongly about) 
 
1. Prepare your comments in one of the following two ways:
 
a. You are STRONGLY REQUESTED to use the comment tool in the 802.3 working group public area at the URL: http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool.zip 
 
To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:
 
Comment_Tool_Generic_Solution.exe
 
b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.
 
PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the
comment file is made available. Please use the comment tool above if possible.
 
 ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
 
 CommentID: (Leave Blank)
 CommenterName:
 CommenterEmail:
 CommenterPhone:
 CommenterCellPhone:
 CommenterCompany:
 Clause:
 Subclause:
 Page:
 Line:
 CommentType: (E, ER, T, or TR)
 Comment:
 CommentEnd:
 SuggestedRemedy:
 RemedyEnd:
 
 --------------------end comment template------------------
 
2. Send your comments to: marek.hajduczenia@xxxxxx and nishihara.susumu@xxxxxxxxxxxxx and paste into the subject line:
 
IEEE P802.3bk Extended EPON draft D1.0 comments