| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Dear colleagues, A diff version of the draft was created and published online at http://www.ieee802.org/3/bk/private/P8023bk_D11_CMP.pdf to facilitate your review of draft D1.1. Please comment on the clean version of the draft i.e. http://www.ieee802.org/3/bk/private/P8023bk_D11.pdf, per original email announcement. My special thanks to Pete Anslow for helping out with the technical problems with Clause 75 diff Regards Marek Hajduczenia, PhD Chair, IEEE P802.3bk Extended EPON Task Force, http://www.ieee802.org/3/bk/index.html From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxx] Task Force Review AnnouncementTO: IEEE P802.3bk participants Dear Colleagues: This is the announcement of the electronic IEEE 802.3bk Task Force review on IEEE P802.3bk Extended EPON draft D1.1. Instructions for accessing the draft and submitting comments follow this announcement. IEEE P802.3bk is an amendment to the IEEE Std 802.3-2008 which is available through the Get802 program at the URL http://standards.ieee.org/getieee802/802.3.html. The Project Authorization Request for this amendment is posted at http://www.ieee802.org/3/bk/P802.3bk.pdf and includes the following: TITLE: IEEE Standard for Information technology--Telecommunications and information exchange between systems—Local and metropolitan area networks--Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical Networks SCOPE:The scope of this project is to amend IEEE Std 802.3 to add at least one physical layer specification, possibly optical power budget extenders, and management parameters necessary for Ethernet Passive Optical Networks (EPON) to support optical loss budgets in excess of those specified in IEEE Std 802.3-2008 (Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks—Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications) and IEEE Std 802.3av-2009 (Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications, Amendment 1: Physical Layer Specifications and Management Parameters for 10 Gb/s Passive Optical Networks). PURPOSE:The purpose of this project is to extend the optical loss budgets supported by Ethernet Passive Optical Networks to support higher density and longer reach applications, while optimizing costs of ownership. NEED FOR THE PROJECT:The project is needed to enable broadband service providers to utilize Ethernet Passive Optical Networks (EPON) at longer reach, higher split ratios or both for more cost-effective scaling. The project will allow for the expansion of the EPON service area and reduced cost per subscriber. Additional benefits include reduction of the footprint and power consumption of central office equipment, as well as minimization of service upgrade and fiber deployment costs, while increasing customer density per central office and allowing central office consolidation.REVIEW SCOPE:The scope of the review is the entire D1.1 Draft. REVIEW OPEN:Friday, August 3, 2012 REVIEW CLOSE:Wednesday, September 5, 2012 11:59PM AOE (http://en.wikipedia.org/wiki/Anywhere_on_Earth and http://www.worldtimezone.com/time/wtzresult.php?CiID=42242) Thank you for your participation in this review and careful review of the draft. Marek Hajduczenia, Chair, IEEE P802.3bk Extended EPON Task ForceEmail: marek.hajduczenia@xxxxxx Susumu Nishihara, Editor-in-Chief, IEEE P802.3bk Extended EPON Task ForceEmail: nishihara.susumu@xxxxxxxxxxxxx ---------------------------------------------------------------- INSTRUCTIONS FOR REVIEWING ON: IEEE P802.3bk draft D1.1 Instructions for accessing the REVIEW documents and submitting comments follow. HOW TO ACCESS THE DRAFTThe draft is posted for TF review purposes only, and neither the draft nor access information should be copied or redistributed to others in violationof document copyrights. The IEEE P802.3bk Extended EPON draft D1.1 may be downloaded from the following URL: http://www.ieee802.org/3/bk/private/P8023bk_D11.pdf The username and password were distributed at the last meeting. If you do not have a copy, please send email to marek.hajduczenia@xxxxxx requesting the access information. Please note that due to technical problems with Frame Maker, there is no diff version available for this draft. The Editor is working on fixing the problem for the next version of the draft. The document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it isavailable for free downloading from Adobe at the following URL: http://www.adobe.com/prodindex/acrobat/readstep.html HOW TO SUBMIT COMMENTSPlease download and read the Comment Tool Tutorial in the TF public area at the URL: http://www.ieee802.org/3/bk/public/1205/8023bk_1205_diab_1.pdf Acceptable comment types:E = EditorialER = Editorial Required (an Editorial comment that the commenter feels very strongly about)T = TechnicalTR = Technical Required (a Technical comment that the commenter feels very strongly about) 1. Prepare your comments in one of the following two ways: a. You are STRONGLY REQUESTED to use the comment tool in the 802.3 working group public area at the URL: http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool.zip To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is: Comment_Tool_Generic_Solution.exe b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail. PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when thecomment file is made available. Please use the comment tool above if possible. ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterEmail: CommenterPhone: CommenterCellPhone: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, ER, T, or TR) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end comment template------------------ 2. Send your comments to: marek.hajduczenia@xxxxxx and nishihara.susumu@xxxxxxxxxxxxx and paste into the subject line: IEEE P802.3bk Extended EPON draft D1.1 comments= |