[802.3_GEPOF] 答复: [802.3_GEPOF] 答复: [802.3_GEPOF] FTTH Council market study
Dear Marek:
Thank you for your reply and the explained.
About “all-out war with folks using twisted pair”, I think there is a
misunderstanding. First, optical fiber with the advantages of its own(and
POF compared with quartz optical fiber is more suitable for common
users)will replace twisted pair in future. But now, i think POF、twisted
pair and coaxial l will exists together a long time. Twisted pair is a
widely-used、technology matures application, users are familiar with and
agree with it, it has a large market, I agree with that. I don't want to
just talk about advantages of technology, rather than market and cost and so
on. If you want to replace the cable or quartz optical fiber soon and
against the user use copper, I think that will have the opposite effect.
On this view, my point is POF will open the market with the advantages of
itself gradually. Like all emerging technologies, at the present stage, POF
is more like one of complementary of other applications, because POF has not
formed the dominant advantage.
Today in China, school、government、enterprise and newly built house which
the users want use all optical fiber network, POF just cater to the demand.
Warm Regards,
Cao Zhi Wen
Dongguan ipt Industrial Co,.LTD.
-----邮件原件-----
发件人: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxxxxx]
发送时间: 2014年9月23日 星期二 下午 7:44
收件人: 'mike'; STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
主题: RE: [802.3_GEPOF] 答复: [802.3_GEPOF] FTTH Council market study
Dear Mike,
We are looking probably at different markets. Homes in US today typically
need 2 WiFi Aps to provide proper coverage and speeds. Some need even more.
Given that these are highly nomadic devices and it is really hard to
pinpoint the proper location, WiFi Aps move around the house until the right
positioning is found. Being able to power them off PoE and Ethernet port
makes a huge difference if there is no power socket in the vicinity and the
extension cord is impractical. I agree with you that EMI/EMC is a problem
for twisted pair, but that is what the code of construction is for, and why
installation of structured cabling should follow the guidelines set on
distance from power lines. If a retrofit has to be made and data lines need
to be run next to power lines, yes, I can certainly see the use for POF
there, but as indicated in the other email - I do not see compelling reason
to give up on twisted pair.
I believe there is space for POF in the market, even if only 1Gb/s speed is
specified, but we need to reasonably assess the market space and what we are
trying to achieve with it. I just do not think that we need all-out war with
folks using twisted pair, or preferring this medium. There is a good market
to share, and the problem might lie not in the availability of the medium,
but actually willingness of home developers to add structured wiring to
their offering, and the drive from home owners to ask them. Today, outside
of dedicated fiber communities, structured wiring is requested by tech-savvy
home owners, who realize the limitations of WiFi in home environment, and
who need more reliable service (for a number of reasons).
Regards
Marek
-----Original Message-----
From: mike [mailto:mike@xxxxxxxxxxx]
Sent: Tuesday, September 23, 2014 2:11 AM
To: STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
Subject: [802.3_GEPOF] 答复: [802.3_GEPOF] FTTH Council market study
Dear Marek:
I think your opinions are very meaningful.
1、 The POE do have its advantages at home, it’s an extension of
twisted pair application, user can power a WIFI AP without do any change to
wiring. But POE is just one application of twisted pair, still have the
twisted pair’s problem(Segurity/EMI/EMC/flexibility), and his
limitation(seems at home POE can just power the WIFI AP, and home users are
not pressing need POE), I think at home there are many other choose, in
China home users can use ONU、modem which provided by the service provider
connect the WIFI. I guess widely using POE power the WIFI AP in US because
of they have relevant standard or regulation.
2、 I quite agree with your point. I think we face the same problem. To
solve this problem you may planning the building cabling system in advance,
and using the POF system, there’re cost and standard pressure. For example,
if you want make a wiring job, but there is no relevant construction
standard, that’s not good, that mean it’s difficult to open the market in
China. I think we both can refer to this standard improve our own national
or regional standard to open the global marketing step by step.
In general, I think each part of the world may have different focus, but the
common application like FTTH should be included. As a international standard
to do this will meet the needs of the global POF market. And it seems a
reasonable demands.
Warm Regards,
Cao Zhi Wen
Dongguan ipt Industrial Co,.LTD.
-----邮件原件-----
发件人: Dai, Eugene (CCI-Atlanta) [mailto:Eugene.Dai@xxxxxxx]
发送时间: 2014年9月23日 星期二 上午 6:52
收件人: STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
主题: Re: [802.3_GEPOF] FTTH Council market study
Marek:
It is true that sell POF for home networking to folks from US is not an
easy job, considering we still use pound and mile while the rest of world
use kg and km for years. However you do bring a good point that we need to
address both advantages and disadvantages.
Thanks,
Eugene
________________________________________
From: Marek Hajduczenia <marek.hajduczenia@xxxxxxxxx>
Sent: Monday, September 22, 2014 5:19 PM
To: Dai, Eugene (CCI-Atlanta); STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_GEPOF] FTTH Council market study
Eugene, et al.,
Note that a good share of newly built houses come already equipped with at
least Cat5e cabling (in some cases, even Cat6). Perhaps it varies state by
state, but I believe house developers started already noticing the advantage
of having a house pre-wired and the extra value it brings to the house on
the competitive market.
You seem to consider GPOF as a replacement for twisted pair and I do not
believe there is a strong advantage there. First, with twisted pair we can
do (and we use it today) PoE for WiFi APs distributed around the house. WiFi
AP does not draw too much power and it is an ideal application for PoE
today. Second, GPOF will require active wall sockets, where fiber is
terminated and converted into regular RJ45 for twisted pair. Much as we
might dislike it, customer equipment comes with twisted pair ports, and not
fiber ports. Using backpower solution is rarely viable today and requires a
brand new class of devices that can source PoE towards the wall socket.
Hardly a backward compatible solution. Furthermore, active wall sockets
require power feed lines, which put additional requirement for circuits
inside of the house. I had a chance to talk to a few local developers and
this was the major sticking point. When power had to be run to the wall
sockets for active POF/twisted pair converters, the whole advantage of
having fiber-based distribution network inside of the house goes away.
I am not saying we should not consider home application got POF, but I
believe building the case based on home application is a hard sell, at least
as far as US is concerned. Europe might be a different story altogether, but
then it is fair to spell it out explicitly in the project documentation. The
best that a project can do at this stage is being fair in its assessment of
the potential market space and its evaluation of other technologies it is
competing against.
Regards
Marek
-----Original Message-----
From: Dai, Eugene (CCI-Atlanta) [mailto:Eugene.Dai@xxxxxxx]
Sent: Monday, September 22, 2014 10:00 AM
To: STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_GEPOF] FTTH Council market study
Hi Serizawa: Thanks for the comments. If we talk about office and /or
business applications we certainly have to deal with the comparison of POF
with CAT5 cables. However, CAT 5 cable is not really used home networking
although we all have short CAT 5 cables here and there at home. The majority
of home networking use either coax or Wifi today. With G.hn products roll
out, twisted pair phone line may be used for home networking. If successful
in home networking, POF could be extended to office/business applications.
All that time the points you brought out have to be addressed. If GEPOF PHY
is lower in cost than 1000BASET PHY, than it could compete with CAT5 for
that market.
This remind me that if we that if we want to bring out the office
application for POF, we had a brief discussions at Ottawa meeting, we may
have to deal with POF and CAT5 comparison as you suggested.
Regards,
Eugene
________________________________________
From: naoshi.serizawa@xxxxxxxxxxxxx <naoshi.serizawa@xxxxxxxxxxxxx>
Sent: Monday, September 22, 2014 1:18 AM
To: STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_GEPOF] FTTH Council market study
Hello Carlos & Eugene,
Thank you for sending information for the FTTH. Also, I looked a material
that Eugene presented at Ottawa.
Those information themselves are very good to explain about use cases of
GEPOF. However it can be substituted for CAT 5/6 cables to those
applications and it seems to be that they are not explaining about the
necessity of GEPOF. In order to convince opponents, we should show them
strong impacts and advantages of GEPOF technology. Otherwise, we can't
answer if they ask us about it.
We should clarify the advantages / cons. against to CAT5/6 cables (cost,
weight, relatability, supply chain, max length, workability, etc).
I am pleased you to take in to account the above situations.
Kind regards,
N Serizawa
-----Original Message-----
From: Hayato Yuki [mailto:hayato-yuuki@xxxxxxxxxxxxxx]
Sent: Monday, September 22, 2014 8:23 AM
To: STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_GEPOF] FTTH Council market study
Hello Carlos-san, Cc Menbers,
I understand that the European home network market has been growing more and
more.
However, we should explain that the POF-cable network is superior to the
category-cable network for home networking.
Thanks,
Yuki@Sumitomo
>Dear all,
>
>please find in this public link:
>http://www.ftthcouncil.eu/documents/Webinars/2014/Webinar_27May2014.pdf
>the latest information of the European FTTH-Council on FTTH deployment.
>
>The FTTH deployment can be used as an indicator of the TAM for the
>gigabit Home Networking market.
>The FTTH deployment speed in Europe is around 5 Million houses per year.
>
>In parallel with this values, we may add TAM values from ADSL/VDSL
>deployment, and new/refurbish homes.
>
>Best Regards
>
>Carlos