| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Chris,
Is the meeting going to be at 11 AM EST or at 9 AM PST?
Victor Renteria Sr. Development Engineering Manager
Bel Magnetic Solutions & TRP Connector | a bel group O +1 858.676.9650 x103 | M +1 650.387.2465 | F +1 858.676.9640 17180 Bernardo Center Drive, San Diego, CA 92128 USA belfuse.com trpconnector.com
From: Christopher T. Diminico [mailto:00000025925d7602-dmarc-request@xxxxxxxx]
Colleagues,
We agreed to meet on Friday to review Amirk's presentation material; webex and February 20th minutes below.
Regards, Chris
1. Please join my meeting, Friday, February 27, 2015 at 11:00 AM Eastern Standard Time. 2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone. Dial +1 (646) 749-3122 Access Code: 856-570-925 Audio PIN: Shown after joining the meeting Meeting ID: 856-570-925 GoToMeeting® Online Meetings Made Easy® Not at your computer? Click the link to join this meeting from your iPhone®, iPad®, Android® or Windows Phone® device via the GoToMeeting app.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Minutes 2/20/15 recorded by Ron Tellas, Panduit NGEABT Use Case Ad Hoc, 2/20/15 Reviewed of patent policy Attendance: Chris DiMinico, Dave Chalupsky, Clark Carty, Dave Jeskey, Dieter Schickentanz, George Zimmerman, German Feyh, Jacky Chang, Jerome-yu, Peter Jones, Bob Wagner, Ron Tellas, Stephen Sedio, Amrik Bains, Yong Kim, Masood Shariff Contribution presented by Chris DiMinico. No other contributions Consideration of WAP cabling guidelines given in TIA/TSB 162-A. TSB (Technical Service Bulletin) George Zimmerman suggested that we also look at older versions of the 162 document to see how the lengths may have changed from 162 to 162A. Clark Carty stated that the majority of installations below ceiling grid with POE power (slide 10 doesn’t show this). Stephen Sedio asked if we can spread these cables out to improve performance. Chris suggested that in the past, a method is to not use adjacent ports in equipment deployment. Ultimately up to end user. How critical is the coupling in the first 10m of the cabling where bundling is most likely? Chris commented that it is likely and that separation at the near end helps the equipment end. Far end requires access to the cabling. Guidelines on mitigation of bundling is offered in TIA/TSB-184. Action items. Review the contributions and think of other deployment considerations that all agree to review. Then develop channel characteristics and use to solicit outside of IEEE to authenticate the use. Question on how this work will allow mitigation of alien crosstalk. Suggestion was to have the ad-hoc provide guidelines within given limits, which will probably focus on lengths of cabling within the topologies. In Europe, there are different uses. We need to verify that the topologies developed and suggested will work internationally. Amrik Bains has data to present for next meeting. Meeting on 3/6 is cancelled. Next meeting is 2/27 at 11 EST. Adjorned at 11:45
-----Original Message----- Colleagues, Use Case Ad Hoc contribution attached and February 6 meeting minutes below.
Regards,
Chris DiMinico
Minutes: Recording Secretary Bob Wagner, Panduit · Reviewed Jan IEEE meeting and objectives agreed upon at that meeting · Defined scope of this Use Case Ad Hoc · DiMinico showed 10GBASE-T and 40GBASE-T channel and permanent link definitions which will be used as a baseline · Gave overview of TSB-155 allowing 10GBASE-T over 37m of Cat6 cabling · Bryan Moffit from Commscope gave a use case presentation on three typical applications: trading desk, data center row, and AP · All agreed that most of the work in this group will be to create the typical cabling configurations and understand how the cable is bundled and what impulse noise/power sources are located near the cabling · Peter Jones asked several end customers at the Milan Cisco Live to provide feedback on how they run their cabling and define the noise environments o Amrik and Jackie Chan agreed to get similar feedback from their customers Action Items: · DiMinico show the TIA guidelines in the next Ad Hoc · Work in tandem with German’s Impulse Noise AdHoc · Solicit Survey information for most common use cases and deployment configurations · Develop AP standard use cases as basis for defining what cabling will work in that environment o Total length o Bundling length o Cable fill o Effect on other cables running 1G in the same cable tray
-----Original Message-----
Colleagues, Reminder Use Case Ad Hoc will convene Friday, February 20, 2015 at 11:00 AM EST for one hour. Please join my meeting, Friday, February 20, 2015 at 11:00 AM Eastern Standard Time. 2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone. Dial +1 (571) 317-3122 Access Code: 436-554-677 Audio PIN: Shown after joining the meeting Meeting ID: 436-554-677
Regards, Chris DiMinico
-----Original Message-----
Colleagues,
Please find contribution (and agenda) attached for the ad hoc today. Sorry for late distribution.
Regards,
Chris
-----Original Message-----
Colleagues,
Kick-off meeting for Use Case Ad Hoc will convene Friday, February 06, 2015 at 11:00 AM EST for one hour. Please review January 15 meeting minutes; contributions welcome.
Mr. Chalupsky announced the formation of the Use Case ad hoc, with the charter of defining use cases and deployment configurations for 2.5 and 5 Gb/s PHY operation in the enterprise environment and has appointed Chris DiMinico as the ad hoc chair.
1. Please join my meeting, Friday, February 06, 2015 at 11:00 AM Eastern Standard Time. 2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone. Dial +1 (646) 749-3122 Access Code: 531-456-733 Audio PIN: Shown after joining the meeting Meeting ID: 531-456-733 Regards, Chris DiMinico
-----Original Message-----
Dear Colleagues,
I am excited to remind you that the first meeting of the 802.3 NGEABT Impulse Noise and Use Case Analysis ad hoc is scheduled for Wednesday, January 28th, 2015 from 9:30AM to 11:00AM PST.
Please note the name change of the study group from “Enterprise Noise Characterization†to “Impulse Noise and Use Case Analysisâ€. I wanted the time slot opposite to Pete Cibula’s study group and sent out the invitation e-mail before the official meetings minutes from Atlanta were available using the name “Enterprise Noise Characterizationâ€. The name is now changed back to the officially adopted name †Impulse Noise and Use Case Analysis†for this study group. Hopefully this will cause not too much confusion.
At this time, I have received no requests for presentation time nor any contributions to be shared with in the ad hoc.
If you are interested in presenting, please request a time slot and please forward your contributions to me (feyh@xxxxxxxxxxxx) and Dave Chalupsky ( david.chalupsky@xxxxxxxxx ) no later than 11:00PM Tuesday, January 27th 2015. I’ll adjust the agenda as needed to accommodate your contribution.
This is a contribution driven process. Let’s establish a framework for contributions in this first meeting of the ad hoc.
Best regards,
German Feyh 802.3 NGEABT Impulse Noise and Use Case Analysis ad hoc Chair
Proposed agenda:
9:30 AM PST meeting start 1. Roll call · Record attendance, attendees’ names and affiliations · (Following other meeting practice, ad hoc attendees are asked to please email Dave Chalupsky <david.chalupsky@xxxxxxxxx> or German Feyh feyh@xxxxxxxxxxxx a note confirming their attendance)
2. Reminder of IEEE patent policy
3. Housekeeping Approve meeting agenda Review the ad hoc charter/scope and deliverables
4. Brainstorming session Review relevant content from prior standards/study group/task force work and/or new contributions Discuss actions/next steps needed to begin moving forward with developing the ad hoc’s deliverables
5. Meeting summary and next steps
11:00 AM PST meeting end
Your action required
· Participants are encouraged to review IEEE meeting guidelines available at the following URL: https://development.standards.ieee.org/myproject/Public/mytools/mob/preparslides.pdf · Participants are encouraged to review the IEEE patent policy available at the URL noted above and repeated here for convenience: www.ieee802.org/3/patent.html · And, last but not least, your contributions related to the work of the ad hoc!
Thank you to all participants and contributors for your interest in and support for the Impulse Noise and Use Case Analysis ad hoc.
Best regards, German Feyh 802.3 NGEABT Impulse Noise and Use Case Analysis ad hoc Chair
PS. A big thank you to Pete Cibula, helping me keep up the decorum. WARNING: All email sent to or from this address will be received or otherwise recorded by the Bel Fuse Inc. corporate email system and is subject to archival, monitoring or review by, and/or disclosure to, someone other than the recipient. |