[802.3_OMEGA] Fwd: [STDS-802-3] IEEE-SA Standards Board has approvals

[ROBERT GROW <bobgrow@xxxxxxx>]

Colleagues:

Some of you may not be on the IEEE 802.3 reflector, so I forward for your information Mr. Law’s email regarding all 802.3 items that were before the IEEE SA Standards Board.

—Bob

Begin forwarded message:

From: "Law, David" <dlaw@xxxxxxx>

Subject: [STDS-802-3] IEEE-SA Standards Board has approvals

Date: June 4, 2020 at 9:47:50 AM PDT

To: STDS-802-3@xxxxxxxxxxxxxxxxx

Reply-To: "Law, David" <dlaw@xxxxxxx>

Dear Colleagues,

I just wanted to inform you that the IEEE-SA Standards Board has approved the following two new IEEE 802.3 standards and four new IEEE 802.3 PARs. My congratulations to all involved.

Best regards,
 David


New IEEE 802.3 Standards
========================

IEEE Std 802.3ca-2020 Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 25 Gb/s and 50 Gb/s Passive Optical Networks

IEEE Std 802.3ch-2020 Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 2.5 Gb/s, 5 Gb/s, and 10 Gb/s Automotive Electrical Ethernet


New IEEE 802.3 PARs
===================

IEEE P802.3cy Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for greater than 10 Gb/s Electrical Automotive Ethernet

IEEE P802.3cz Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for Multi-Gigabit Optical Automotive Ethernet

IEEE P802.3da Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for Enhancement of 10 Mb/s Operation over Single Balanced Pair Multidrop Segments

IEEE P802.3db Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Optical Fiber using 100 Gb/s Signaling


________________________________________________________________________
To unsubscribe from the STDS-802-3 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3&A=1

---

To unsubscribe from the STDS-802-3-OMEGA list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-OMEGA&A=1