[802.3_RTPGE] FW: [802.3_DIALOG] Invitation to participate in Sponsor Ballot of IEEE P802.3bw 100BASE-T1
Colleagues,
In case you missed David Law's email, this is the announcement of the
formation of the Sponsor Ballot pool for P802.3bw 100BASE-T1. If you wish to
vote on the sponsor ballot draft, you will need to follow the instructions
in this email. If you are not a member of the IEEE-SA, you will have to pay
a balloting fee, which is detailed below.
The Sponsor Ballot pool is open for a limited time, so you should act now if
you are interested.
Regards,
Steve
Steven B. Carlson
Chair, IEEE P802.3bp 1000BASE-T1 PHY Task Force
http://www.ieee802.org/3/bp/index.html
Executive Secretary, IEEE 802.3 Working Group
http://grouper.ieee.org/groups/802/3/index.html
President
High Speed Design, Inc.
Portland, OR
scarlson@xxxxxxxxxxxxx
-----Original Message-----
From: Law, David [mailto:dlaw@xxxxxx]
Sent: Tuesday, February 24, 2015 2:28 AM
To: STDS-802-3-DIALOG@xxxxxxxxxxxxxxxxx
Subject: [802.3_DIALOG] Invitation to participate in Sponsor Ballot of IEEE
P802.3bw 100BASE-T1
Dear colleagues,
Draft standards within the IEEE 802.3 Ethernet Working Group pass through
two balloting cycles, first through IEEE 802.3 Working Group Ballot which
this project is currently in, then through Sponsor Ballot. If you wish to
take part in the Sponsor Ballot of the IEEE P802.3bw 100 Mb/s Operation over
a Single Balanced Twisted Pair Cable (100BASE-T1) draft please follow the
instructions found below. Please note that you have to join the ballot group
by 26th March 2015, 03:59 UCT (25th March 2015, 23:59 U.S. Eastern Standard
Time).
If you have any questions, please contact me.
Best regards,
David
ENROLLMENT INSTRUCTIONS
-----------------------
To participate, you must have access to myProject through an IEEE Web
Account <http://www.ieee.org/about/help/my_account/web_account.html>. This
is the same IEEE Web Account you would use to access the IEEE attendance
tool.
If you are an IEEE-SA member:
Follow this process:
1. Log onto myProject; click the link for myBallot
<https://development.standards.ieee.org/my-site/home>.
2. On the Balloting tab, click the link for "Show/Join Open Ballot
Invitations"
<https://development.standards.ieee.org/my-site/open-ballot-invitations>.
3. Scroll down until you find IEEE P802.3bw; then scroll over to the right
margin and click "join" under the "Actions" column. If you cannot see IEEE
P802.3bw please check the 'Show All Open Ballot Invitations' box.
4. Enter or select an affiliation from the drop down menu (appearing as you
key in your affiliation in the Organization window), select your
classification category, and click "OK" at the bottom of the screen. You
will receive an on-screen confirmation that you successfully joined the
group.
If you are not an IEEE SA Member:
You can either enroll in a single ballot by paying a per ballot fee or you
can join the IEEE SA by choosing an option link below. Joining the IEEE SA
entitles you to participate in as many sponsor ballots as you like for the
year.
OPTION 1 - I am already an IEEE Member and I want to add Standards
Association Membership. Go to:
<http://www.ieee.org/membership_services/index.html>
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and
IEEE Standards Association. Go to:
<http://www.ieee.org/membership_services/membership/join/index.html>.
OPTION 3 - I am not interested in becoming an IEEE Member, however I would
like to enroll as a Standards Association Member only. Go to:
<http://standards.ieee.org/sa-mem/join.html>
If you are interested in paying the per ballot fee please contact me at
<David_Law@xxxxxxxx>.
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
---------------------------------------------
Balloting group members have an obligation to respond during the balloting
period; failure to return a ballot may disqualify the balloter from
participation in future balloting groups.
Once the document is ready to be balloted, you will receive notification via
email. You will typically have 30 days to review the document and return
the ballot with your vote. By agreeing to participate in this ballot you
have an *obligation* to respond. Failure to return a completed ballot may
disqualify you from participating in future ballots.