| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Thanks - Val had tried that, but unfortunately, frame wasn’t allowing the extra spaces, and wasn’t behaving similar to word… George Zimmerman, Ph.D. President & Principal CME Consulting, Inc. Experts in Advanced PHYsical Communications 310-920-3860 From: stds-802-3-spep2p@xxxxxxxxxxxxxxxxx <stds-802-3-spep2p@xxxxxxxxxxxxxxxxx>
On Behalf Of Murray, Brian George We can discuss tomorrow and I am sure the editors working in FrameMaker have a much better view of what works. My thinking was as follows, using 2 characters for each 1T symbol
'-1', ' 0', ' 1' and a space to separate results in 17 character per 6-tuple, which aligns with a fixed font. -1 1 -1 1 1 -1, which contains 17 characters, aligns with 0 0 1 -1 -1 1, which contains 17 characters. Not sure if the fixed font will be preserved in the email reflector. Brian From: George Zimmerman <george@xxxxxxxxxxxxxxxxxxxx>
All – I have received a request to pull comments 18 & 25 from the EZ buck motion. These comments are about formatting of the tables. The editors have looked at what results in framemaker and concluded that
it not only does not improve the draft, it makes the tables more cluttered.
Specifically, they will be looking to reject both comments with the justification:
Fixed font width will not cause the symbols to line up in columns. For example, -1 1 -1 1 1 -1, which contains 14 characters, can never align perfectly over 0 0 1 -1 -1 1, which contains
13 characters, with fixed font width. Just a reminder, please look at the EZ bucket comments and forward any that you want to discuss to the reflector. We will then pull those comments, just as I have now done for the two referenced here. George Zimmerman, Ph.D. President & Principal CME Consulting, Inc. Experts in Advanced PHYsical Communications 310-920-3860 To unsubscribe from the STDS-802-3-SPEP2P list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPEP2P&A=1 To unsubscribe from the STDS-802-3-SPEP2P list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPEP2P&A=1 To unsubscribe from the STDS-802-3-SPEP2P list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPEP2P&A=1 |