Ah, I see your point, Wayne. However, when 802.3da goes to SA ballot, the sharp-eyed folks are going to spot that we have added physical and electrical characteristics for these
connections. As Geoff Thompson pointed out in our most recent ad hoc, there will be a problem if there is not an objective driving that inclusion. Mindful of the fact that Geoff has been doing this work a lot longer than me, I believe we need such an objective
but realize that my wording may need refinement.
Bob
From:
Wayne Larsen <wayne@xxxxxxxxxxxxxxx>
Date: Friday, June 16, 2023 at 6:05 AM
To: Bob Voss <Bob.Voss@xxxxxxxxxxx>, STDS-802-3-SPMD@xxxxxxxxxxxxxxxxx <STDS-802-3-SPMD@xxxxxxxxxxxxxxxxx>
Subject: RE: Proposed Replacement Text, 802.3da Objective 6
>> CAUTION: This email originated outside of our organization. Do not open attachments or click on links unless you recognize and verify the sender, and
know the content is safe. <<
Sorry for the slows, Bob. My reflector subscription only comes to this e-mail, which I don’t check as often/
What I mean is, since we already have an objective to meet the communication and powering objectives, we don’t need an objective to specify the connector in such a way as to meet the communications and powering
objectives.
Wayne
From: Bob Voss <Bob.Voss@xxxxxxxxxxx>
Sent: Wednesday, June 14, 2023 2:36 PM
To: Wayne Larsen <wayne@xxxxxxxxxxxxxxx>; STDS-802-3-SPMD@xxxxxxxxxxxxxxxxx
Cc: Bob Voss <Bob.Voss@xxxxxxxxxxx>
Subject: Re: Proposed Replacement Text, 802.3da Objective 6
Thank you, Wayne. How would you change this objective to make it more effective?
Regards,
Bob
>> CAUTION: This email originated outside of our organization. Do not open attachments or click on links unless you recognize and verify the sender, and
know the content is safe. <<
Bob That’s just an objective to achieve other objectives.
Including the proposed text might be helpful …
“Specify required electrical and mechanical characteristics for connection methods necessary to achieve communications and powering objectives.”
Colleagues,
I had a flash of inspiration and would like to propose the following text to replace objective 6. Please comment and provide feedback via the
reflector.
Thanks, and Best Regards,
Bob
To unsubscribe from the STDS-802-3-SPMD list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPMD&A=1
To unsubscribe from the STDS-802-3-SPMD list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPMD&A=1
|