Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Dear Colleagues:
This is the announcement of the review of the IEEE P802.3da 10 Mb/s Single Pair Multidrop Segments Enhancement Task Force draft amendment D0.75. Instructions for accessing the draft and submitting comments
follow in this announcement.
The Project Authorization Request for this amendment is posted at:
https://www.ieee802.org/3/da/P802d3da_PAR.pdf
The Five Criteria Responses for this amendment are posted at:
https://mentor.ieee.org/802-ec/dcn/20/ec-20-0096-00-ACSD-p802-3da.pdf
The Objectives for this amendment are posted at:
https://www.ieee802.org/3/da/802d3da_objectives.pdf
___________________________________________
REVIEW SCOPE:
The entire document is in scope. We will be resolving comments during the
July 2023
Plenary meeting series.
REVIEW OPEN:
Monday, 19 June 2023
REVIEW CLOSE: Wednesday, 5 July 2023, 11:59pm AOE
-------------------------------------------------------------------------
HOW TO ACCESS THE DRAFT
The draft is posted for Task Force review purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.
Draft 0.75 should be used for commenting and may be downloaded from:
URL: https://www.ieee802.org/3/da/private/8023da_D0p75.pdf
Username and password: distributed at meetings
For your convenience, a diff doc has been provided, found here:
https://www.ieee802.org/3/da/private/8023da_D0p75CMPD0p6.pdf
The document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from Adobe at:
URL: http://www.adobe.com/prodindex/acrobat/readstep.html
_______________________________________
HOW TO SUBMIT COMMENTS
Acceptable comment types:
E = Editorial
T = Technical
<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf>
Also, see ‘Chad’s rules for making comments’, which are made available to help write good comments and streamline the comment process:
https://www.ieee802.org/3/da/comments/Rules%20for%20making%20comments.txt
a. Access the comment spreadsheet at the URL (PREFERRED):
<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls>
b. Access the comment tool at the URL:
<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip>
To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:
Comment_Tool_Generic_Solution.exe
c. To submit comments in text (ASCII) form (LEAST PREFERRED), please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit
as an ASCII text file or as part of your e-mail.
PLEASE NOTE: The ASCII method involves a manual transcription; hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if
possible.
------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
CommentID: (Leave Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCellPhone:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E, ER, T, or TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:
--------------------end comment template------------------
2. Send your comments to: George Zimmerman george@xxxxxxxxxxxxxxxxxxxx,
CC’ing cmjones@xxxxxxxxx and paste into the subject line:
IEEE P802.3da 10Mbps SPMD Task Force D0.75 comments
Be sure to make the filename of your comment file unique by appending your name to the filename.
_____________________________________________________________
Thank you for your participation in this review and careful review of the draft.
Chad Jones
Principal Engineer, Cisco Systems
Chair, IEEE P802.3da Task Force
Principal, NFPA 70 CMP3 To unsubscribe from the STDS-802-3-SPMD list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPMD&A=1 |