And…. It got me too. My reply was marked confidential, apologies. This one is not.
Regards,
Chad Jones
Principal Engineer, Cisco Systems
Executive Secretary, IEEE 802.3 Working Group
Chair, IEEE P802.3da Task Force
Principal, NFPA 70 CMP3
-
From: Chad Jones (cmjones) <00000b60b3f54e8d-dmarc-request@xxxxxxxxxxxxxxxxx>
Date: Wednesday, November 12, 2025 at 5:19 PM
To: STDS-802-3-SPMD@xxxxxxxxxxxxxxxxx <STDS-802-3-SPMD@xxxxxxxxxxxxxxxxx>
Subject: Re: [802.3_SPMD] 802.3da MPOE Voltage Change Proposal
Jason, I’m going to have to request that this email is removed from the reflector as our corporate overlords seem to have changed a setting to mark emails confidential by default without informing us. While the intent of the email, and certainly nothing contained
in it, is not confidential, it has been marked as such. Please resend. Thank you
Regards,
Chad Jones
Principal Engineer, Cisco Systems
Executive Secretary, IEEE 802.3 Working Group
Chair, IEEE P802.3da Task Force
Principal, NFPA 70 CMP3
Cisco Confidential
From: Jason Potterf (jpotterf) <0000142267c8912c-dmarc-request@xxxxxxxxxxxxxxxxx>
Date: Wednesday, November 12, 2025 at 5:15 PM
To: STDS-802-3-SPMD@xxxxxxxxxxxxxxxxx <STDS-802-3-SPMD@xxxxxxxxxxxxxxxxx>
Subject: [802.3_SPMD] 802.3da MPOE Voltage Change Proposal
Following comments by Arkadiy in the last two drafts, I have reconsidered his proposal to increase the maximum MPSE voltage. Please see the attached presentation. I would like the Task Force to consider making the changes outlined in the slide deck during our
meeting tomorrow morning.
Jason Potterf
Principal Hardware Engineer, Cisco
Cisco Confidential
To unsubscribe from the STDS-802-3-SPMD list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPMD&A=1
To unsubscribe from the STDS-802-3-SPMD list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPMD&A=1
To unsubscribe from the STDS-802-3-SPMD list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPMD&A=1