|
Good to har you want to remove it.,
IANA should update their copy oif the MIB module and your
document
should reference the IANA web site for that MIB that
people
need (cause you wil IMPORT that MIB module I
think).
I do not know what the status is of your request. I have not
heard from IANA.
You can/should ask IANA (you got a ticket number, right) what
the status
is of your request.
Maybe Dan can be of help here as well.
Bert
----- Original Message -----
Sent: Saturday, February 20, 2010 2:37
AM
Subject: Re: [802.3.1_MIBS] FW: [IANA
#299307] AutoReply: General Request for Assignments
Bert,
We
reproduced the IANA-MAU-MIB in our draft because it
was
included in RFC 4836. I have no problem with removing
it
from the draft.
What
is the prognosis for the request for assignments?
Howard
W.r.t.
>
> Registry :
> The assignment of the
IANAifMauTypeListBits and
> IANAifMauAutoNegCapBits textual conventions
as well as the
> dot3MauType object identities is contained in the
> IANA-MAU-MIB, which is currently published as IETF RFC 4836.
>
The IEEE 802.3 Ethernet Working Group is currently working on
> a
project, known as IEEE P802.3.1, that will update and
> republish the
IETF RFCs that are relevant to the management
> of Ethernet interfaces,
including the contents of RFC 4836.
The IANA-MAU-MIB module was made an IANA-maintained MIB
module,
so that we do not need to re-issue a new RFC (or IEEE
document) every
time that a new type must be defined. The IANA maintains it
here:
And so there is also no need for IEEE 802.3 to define a new
document that
adds these new values. If approved, they will be added in
the current online
iana-mau-mib at the iana web site.
In fact RFC4836 states:
7. IANA Considerations
This document defines first version of the
IANA-maintained IANA-MAU-
MIB module. It is intended
that each new MAU type, Media Available
state, Auto
Negotiation capability, and/or Jack type defined by the
IEEE
802.3 working group and approved for publication in a revision
of IEEE Std 802.3 will be added to the IANA-maintaned MIB
module,
provided that it is suitable for being managed by the
base objects in
the MAU-MIB module.
For each new MAU type added, a short
description of the MAU
technology and, wherever possible, a
reference to a publicly
available specification SHOULD be
specified. An Expert Review, as
defined in RFC 2434
[RFC2434], is REQUIRED, for each modification.
Bert
----- Original Message -----
Sent: Wednesday, February 10, 2010
10:27 AM
Subject: RE: [802.3.1_MIBS] FW: [IANA
#299307] AutoReply: General Request for Assignments
These will probably be referred to Bert as last chair of the
Ethernet
MIB WG (now concluded) and/or to me as Area Director.
Dan
> -----Original Message-----
> From:
Howard Frazier [mailto:hfrazier@xxxxxxxxxxxx]
> Sent: Wednesday,
February 10, 2010 3:50 AM
> To: STDS-802-3-MIB@xxxxxxxxxxxxxxxxx
>
Subject: [802.3.1_MIBS] FW: [IANA #299307] AutoReply: General
>
Request for Assignments
>
>
>
> In
accordance with the directions of the IEEE 802.3 Ethernet
> Working
Group and the IEEE 802.3.1 MIB Task Force, I have
> submitted a
request to IANA for additions to the
> IANAifMauTypeListBits textual
convention, additions to the
> IANAifMauAutoNegCapBits textual
convention, and additions to
> the dot3MauType object
identities.
>
> The contents of the request are included below,
in an
> automated response from IANA.
>
> Howard
Frazier
> Chair, IEEE 802.3.1 MIB Task Force
>
>
-----Original Message-----
> From: IANA General Enquiries via RT
[mailto:iana-questions@xxxxxxxx]
> Sent: Tuesday, February 09, 2010
5:41 PM
> To: Howard Frazier
> Subject: [IANA #299307]
AutoReply: General Request for Assignments
>
> To whom it may
concern:
>
> This is an automatically generated message to
notify you that
> we have received your request, and it has been
recorded in
> our ticketing system with a reference number of
299307.
>
> There is no need to reply to this message right
now. IANA
> staff will review your message shortly.
>
>
If this message is in reply to a previously submitted ticket,
> it is
possible that the previous ticket has been marked as
> closed. As we
review this ticket, we will also review
> previous correspondence and
take appropriate action.
>
> To expedite processing, and ensure
our staff can view the
> full history of this request, please make
sure you include
> the follow exact text in the subject line of all
future
> correspondence on this issue:
>
> [IANA
#299307]
>
> You can also simply reply to this message, as this
tag is
> already in the subject line.
>
> Thank
you,
>
> The Internet Assigned Numbers Authority
> iana-questions@xxxxxxxx
>
>
--------------------------------------------------------------
>
-----------
> Contact Name :
> Howard Frazier
>
>
Contact Email :
> hfrazier@xxxxxxxxxxxx
>
> Type of Assignment :
> Assignment of the following additions
to the
> IANAifMauTypeListBits textual convention, immediately
> following b1000BasePX20U(53) -- 1000BASE-PX20U:
>
>
b10GbaseT(xx) -- 10GBASE-T
> b10GbaseLRM(xx) -- 10GBASE-LRM
>
b1000baseKX(xx) -- 1000BASE-KX
> b10GbaseKX4(xx) --
10GBASE-KX4
> b10GbaseKR(xx) -- 10GBASE-KR
> b10G1GbasePRXD1(xx)
-- 10/1GBASE-PRX-D1
> b10G1GbasePRXD2(xx) -- 10/1GBASE-PRX-D2
>
b10G1GbasePRXD3(xx) -- 10/1GBASE-PRX-D3
> b10G1GbasePRXU1(xx) --
10/1GBASE-PRX-U1
> b10G1GbasePRXU2(xx) -- 10/1GBASE-PRX-U2
>
b10G1GbasePRXU3(xx) -- 10/1GBASE-PRX-U3
> b10GbasePRD1(xx) --
10GBASE-PR-D1
> b10GbasePRD2(xx) -- 10GBASE-PR-D2
>
b10GbasePRD3(xx) -- 10GBASE-PR-D3
> b10GbasePRU1(xx) --
10GBASE-PR-U1
> b10GbasePRU3(xx) -- 10GBASE-PR-U3
>
>
Assignment of the following additions to the
>
IANAifMauAutoNegCapBits textual convention, immediately
> following
b1000baseTFD(15) -- 1000BASE-T full duplex mode:
>
>
b10GbaseT(xx) -- 10GBASE-T
> b1000baseKX(xx) -- 1000BASE-KX
>
b10GbaseKX4(xx) -- 10GBASE-KX4
> b10GbaseKR(xx) -- 10GBASE-KR
>
> Assignment of the following additions to the dot3MauType
>
object identities, immediately following
> dot3MauType1000BasePX20U
OBJECT-IDENTITY ...
> ::= { dot3MauType 53 }:
>
> dot3MauType10GbaseT
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION
"Four-pair Category 6A or better, full
> duplex mode
only"
>
REFERENCE "IEEE Std 802.3, Clause
55"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbaseLRM
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "R
multimode fiber over 1310 nm
optics"
>
REFERENCE "IEEE Std 802.3, Clause
68"
> ::= { dot3MauType xx
}
>
> dot3MauType1000baseKX
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "X
backplane, full duplex mode
only"
>
REFERENCE "IEEE Std 802.3, Clause
70"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbaseKX4
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "4
lane X backplane, full duplex mode
only"
>
REFERENCE "IEEE Std 802.3, Clause
71"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbaseKR
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "R
backplane, full duplex mode
only"
>
REFERENCE " IEEE Std 802.3, Clause
72"
> ::= { dot3MauType xx
}
>
> dot3MauType10G1GbasePRXD1
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber asymmetric-rate
> EPON OLT, supporting low
>
power budget (PRX10)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10G1GbasePRXD2
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber asymmetric-rate
> EPON OLT, supporting medium
>
power budget (PRX20)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10G1GbasePRXD3
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber asymmetric-rate
> EPON OLT, supporting high
>
power budget (PRX30)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10G1GbasePRXU1
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber asymmetric-rate
> EPON ONU, supporting low
>
power budget (PRX10)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10G1GbasePRXU2
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber asymmetric-rate
> EPON ONU, supporting medium
>
power budget (PRX20)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10G1GbasePRXU3
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber asymmetric-rate
> EPON ONU, supporting high
>
power budget (PRX30)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbasePRD1
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber symmetric-rate EPON
> OLT, supporting low
>
power budget (PR10)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbasePRD2
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber symmetric-rate EPON
> OLT, supporting medium
>
power budget (PR20)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbasePRD3
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber symmetric-rate EPON
> OLT, supporting high
>
power budget (PR30)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbasePRU1
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber symmetric-rate EPON
> ONU, supporting low and
>
medium power budget (PR10 and
PR20)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
> dot3MauType10GbasePRU3
OBJECT-IDENTITY
>
STATUS
current
> DESCRIPTION "One
single-mode fiber symmetric-rate EPON
> ONU, supporting high
>
power budget (PR30)"
>
REFERENCE " IEEE Std 802.3, Clause
75"
> ::= { dot3MauType xx
}
>
>
> Registry :
> The assignment of the
IANAifMauTypeListBits and
> IANAifMauAutoNegCapBits textual
conventions as well as the
> dot3MauType object identities is
contained in the
> IANA-MAU-MIB, which is currently published as IETF
RFC 4836.
> The IEEE 802.3 Ethernet Working Group is currently
working on
> a project, known as IEEE P802.3.1, that will update and
> republish the IETF RFCs that are relevant to the management
> of Ethernet interfaces, including the contents of RFC 4836.
>
> Description :
> The new MAU types and the associated AutoNeg
capability bits
> listed above were specified in recently approved
amendments
> to IEEE Std 802.3, including IEEE Std 802.3an-2006, IEEE
Std
> 802.3aq-2007, IEEE Std 802.3ap-2007, and IEEE Std
>
802.3av-2009. The description of the IANAifMauTypeListBits
> textual
convention states that "...changes in this textual
> convention SHALL
be synchronized with relevant changes in the
> dot3MauType
OBJECT-IDENTITIES." The assignments will be
> reflected in Clause 14
of IEEE P802.3.1, "IEEE Draft Standard
> for Management Information
Base (MIB) definitions for Ethernet."
>
>
> Additional
Info :
> IEEE Std 802.3-2008, subclauses 30.5.1.1.2 aMAUType and
> 30.6.1.1.5 aAutoNegLocalTechnologyAbility, as amended by IEEE
> Std 802.3av-2009.
>
Geen virus gevonden in het
binnenkomende-bericht.
Gecontroleerd door AVG - www.avg.com
Versie: 9.0.733 /
Virusdatabase: 271.1.1/2678 - datum van uitgifte: 02/09/10
20:35:00
Geen virus gevonden in het binnenkomende-bericht.
Gecontroleerd
door AVG - www.avg.com
Versie: 9.0.733 / Virusdatabase: 271.1.1/2698 -
datum van uitgifte: 02/19/10 20:34:00
|