[BP] Error in Revision 5
All:
Thanks to those of you who checked revision 5 of the synthesized
channel S-parameters.
An error in the "thru" S-parameters was recently pointed out to me.
This shows up as non-causal behavior. If you apply a pulse to ports 1,3
at time = 0, you should see nothing at ports 2,4 until about 5
nanosecond. The error is that the there is a small rippling response
between time = 0 and time = 5 nanosecond.
The source of the problem has been identified and is being fixed. I
expect to send out a new version soon.
Regards,
Steve A.
begin:vcard
n:Anderson;Stephen
x-mozilla-html:FALSE
org:Xilinx, Inc.;Communications Technology Division, Minneapolis
adr:;;;;;;
version:2.1
email;internet:stevea@xilinx.com
title:Staff Engineer
fn:Stephen Anderson
end:vcard