Re: [BP] Interference tolerance test channels
Hi Charles,
DC and low freq's went down way to much! Can you create a model with the
same losses at say 1GHz or so and 2 dB less at 5GHz? I thought that's
what we agreed.
... Rich
-----Original Message-----
From: Charles Moore [mailto:charles.moore@avagotech.com]
Sent: Friday, January 13, 2006 8:42 PM
To: STDS-802-3-BLADE@listserv.ieee.org
Subject: [BP] Interference tolerance test channels
guys,
I propose that we use the model ITTC_23.s4p for reduced attenuation
EIT modeling. If it really will not work, ITTC_20.s4p is available as a
bail out channel. If it looks too easy, let me know and i will step it
up just
a tad.
The numbers refer to the fitted attenuation at 5.15...GHz.
charles
--
|--------------------------------------------------------------------|
| Charles Moore
| Avago Technologies
| Image Solutions Division
| charles.moore@avagotech.com
| (970) 288-4561
|--------------------------------------------------------------------|