Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [BP] channel loss difference



Charles,
Is that number SE or differential?

John

-----Original Message-----
From: Charles Moore [mailto:charles.moore@AVAGOTECH.COM] 
Sent: Thursday, January 26, 2006 3:26 PM
To: STDS-802-3-BLADE@listserv.ieee.org
Subject: Re: [BP] channel loss difference

shannon,

Yes you are right. I forgot that we are including the Rx board in 
"withCoupler"
channel and s23 and s41 start to make a difference. Here is yet another 
channel,
this one really has sdd21=23.1dB at Nyquist.

charles

Sawyer, Shannon wrote:

> Charles,
>
> The difference (no pun intended) shows up in the differential vs 
> single ended S-Parameters. I plotted SDD21 and S21 for 
> modITTC23withCoupler.s4p, and there is 1.428dB difference at 5.160GHz.

> See attached.
>
> Sorry I had to be at another meeting at noon, but I like the idea of 
> going to a 20dB channel. In my opinion that's the lever big enough to 
> get a real system working. Unfortunately several (8 Molex, 4 Tyco, 3 
> Intel) channels violate that SDD21 up to 5GHz. See attached.
>
> -Shannon
>


-- 
|--------------------------------------------------------------------|
|       Charles Moore 
|       Avago Technologies
|       Image Solutions Division
|       charles.moore@avagotech.com
|       (970) 288-4561
|--------------------------------------------------------------------|