Re: [BP] EIT simulation proposal
If we use the package model, I believe we will need to drive 890 mV at
25ps rise time to get 800 mV at the device pin. Also the package will
introduce approximately 3 ps of Dj.
... Rich
-----Original Message-----
From: Charles Moore [mailto:charles.moore@avagotech.com]
Sent: Friday, March 10, 2006 8:39 PM
To: STDS-802-3-BLADE@listserv.ieee.org
Subject: [BP] EIT simulation proposal
This is my proposal for simulations to find appropriate interference
levels to specify for 10GBASE-KR interference tolerance test.
Next week i will add:
1. A corrected version based on constructive critisism.
2. A pseudo channel (or channels) which convert PRBS to gaussian
noise with the same PSD as the original PRBS.
3. Details for the first phone conference.
charles
--
|--------------------------------------------------------------------|
| Charles Moore
| Avago Technologies
| ISD
| charles.moore@avagotech.com
| (970) 288-4561
|--------------------------------------------------------------------|