[802.3_10SPE] questions on Evaluation of Immunity Aspects in Multidrop Channels presentation

[Jay Cordaro <00000acecc09e6c8-dmarc-request@xxxxxxxx>]

Hi Galin,

There are some setup details not clear to me from the presentation

What was the BCI level used to inject?  

Was the injection level flat with frequency or did it implement the ramps per ISO11452-4?

What was the calibration method?  

What is the grounding connection for the jigs?  It appears in the picture on page 4 that the grounds of the jigs shown on page 5 were connected to the ground plane but it is not stated.  

Cable type?  Cable length?  looks like 8,4-8,5m but not documented.

thank you.

regards,

Jay Cordaro 

---

To unsubscribe from the STDS-802-3-10SPE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-10SPE&A=1