[802.3_NGAUTO] FW: [STDS-802-3] IEEE-SA Standards Board has approvals
Colleagues,
Please see the message below from Mr. Law. Our standard, 802.3ch-2020, was approved today. My thanks to all of you for your contributions and hard work over the last three years. In particular, I would like to thank Natalie Wienckowski, our Chief Editor, and George Zimmerman, our ad hoc chair, for extraordinary effort on behalf of the project.
The editorial team is working with the IEEE staff editor on publication. I'll update when we have an idea of the a publication date.
Again, my thanks and congratulations to all of you!
Best regards,
Steve
Steven B. Carlson
Chair, P802.3ch Multi-Gig Automotive Ethernet PHY Task Force
Chair, Beyond 10 Gb/s Automotive Electrical PHYs Study Group
Executive Secretary, IEEE 802.3 Ethernet Working Group
http://www.ieee802.org/3/index.html
President
High Speed Design, Inc.
Portland, OR
scarlson@xxxxxxxxxxxxx
-----Original Message-----
From: Law, David <dlaw@xxxxxxx>
Sent: Thursday, June 04, 2020 9:48 AM
To: STDS-802-3@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3] IEEE-SA Standards Board has approvals
Dear Colleagues,
I just wanted to inform you that the IEEE-SA Standards Board has approved the following two new IEEE 802.3 standards and four new IEEE 802.3 PARs. My congratulations to all involved.
Best regards,
David
New IEEE 802.3 Standards
========================
IEEE Std 802.3ca-2020 Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 25 Gb/s and 50 Gb/s Passive Optical Networks
IEEE Std 802.3ch-2020 Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 2.5 Gb/s, 5 Gb/s, and 10 Gb/s Automotive Electrical Ethernet
New IEEE 802.3 PARs
===================
IEEE P802.3cy Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for greater than 10 Gb/s Electrical Automotive Ethernet
IEEE P802.3cz Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for Multi-Gigabit Optical Automotive Ethernet
IEEE P802.3da Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for Enhancement of 10 Mb/s Operation over Single Balanced Pair Multidrop Segments
IEEE P802.3db Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Optical Fiber using 100 Gb/s Signaling
________________________________________________________________________
To unsubscribe from the STDS-802-3 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3&A=1
________________________________________________________________________
To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1