| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
From: "Mark Nowell (mnowell)" <00000b59be7040a9-dmarc-request@xxxxxxxx> A reminder about the open D1.0 Task Force ballot for P802.3cu. It was pointed out to me that I didn’t include the usual details on how to submit the comments. My apologies. See below:
*** DETAILS *** Instructions for accessing the draft and submitting comments are below. Please take a moment to review these instructions, as following them will help the editors respond more efficiently. ___________________________________________ REVIEW SCOPE: The scope of the review is the entire IEEE P802.3cu D1.0 Draft. REVIEW OPEN: Sunday Sept 29, 2019 REVIEW CLOSE: Sunday Oct 27th, 2019 AOE ------------------------------------------------------------------------- HOW TO ACCESS THE DRAFT The draft is posted for Task Force review purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights. Draft 1.0 may be downloaded from: URL: http://www.ieee802.org/3/cu/private/8023cu_D1p0.pdf
Username: 802.3cu Password: distributed at meetings – contact Chair (mnowell@xxxxxxxxx) if you need it. (The 802.3 common username/password will work) Please submit comments against the above draft. _______________________________________ HOW TO SUBMIT COMMENTS Acceptable comment types: E = Editorial T = Technical 1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use either the comment tool or spreadsheet. A comment entry tutorial is available at http://www.ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p1.pdf. a. Access the comment tool at the URL (last updated September 2015): http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is: Comment_Tool_Generic_Solution.exe b. Access the comment spreadsheet at the URL: http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary
and submit as an ASCII text file or as part of your e-mail. Please use this method only if the previous two methods are not practical. PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible. ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterEmail: CommenterPhone: CommenterCellPhone: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, or T) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end comment template------------------ 2. Send your comments to:mnowell@xxxxxxxxx and gnicholl@xxxxxxxxx
and paste into the subject line: IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force Review D1.0 comments This can be done with this link: mailto:gnicholl@xxxxxxxxx?cc=mnowell@xxxxxxxxx&subject=IEEE
P802.3cu 100Gb/s and 400Gb/s over SMF at 100Gb/s per Wavelength Task Force Review D1.0 comments ____________________________________________________________ Thank you for your participation in this review and careful review of the draft. Mark Nowell, Chair, IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force Email: mnowell@xxxxxxxxx Gary Nicholl, Chief Editor, IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force
Email: gnicholl@xxxxxxxxx From: Mark Nowell <mnowell@xxxxxxxxx> Dear Colleagues, I’m announcing the availability of P802.3cu D1.0 to initiate the Task Force Review. The draft is available in our private area:
http://www.ieee802.org/3/cu/private/index.html
You can use the 802.3 Username/password combination or contact me for the Task Force specific password. The Working Group ballot commenting tool will be used to gather comments for Task Force Review. The tool is available here:
http://www.ieee802.org/3/WG_tools/index.html A comment entry tutorial is available at
http://www.ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p1.pdf.
The D1.0 Task Force Review period will close at 11:59PM EST on
Sunday Oct 27th AOE. Given the limited review cycle and the limited meeting time availability in November to review the comments, please focus your
review on the key issues and gaps in the document (e.g. TBDs) rather than editorial issues. In November, the editorial team will endeavour to address all of the comments received but will prioritize the comments to make the best use of the meeting
time in Hawaii.
Please let me know if you have any questions.
Mark Nowell, Chair IEEE P802.3cu
100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1
To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1 |