Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_100G-OPTX] Announcing D1.1 availability and start of Task Force Review



Dear Colleagues,

 

This email announces first recirculation of the Task Force Review of P802.3cu’s D1.1 specification.   As agreed at the November meeting, this version will be submitted to the 802.3 Working group for approval to move to Working Group Ballot.  Sometimes, we would encourage comments to be held until WG Ballot starts, but I’d prefer to encourage review and comments so we can accelerate the maturity of the draft.  We hope to be meeting early in the week in Geneva to allow the editorial team time to incorporate any changes before we ask the WG for approval on the Thursday evening.

 

Instructions are below on how to access the draft and submit comments.

 

*** DETAILS ***

Instructions for accessing the draft and submitting comments are below.  Please take a moment to review these instructions, as following them will help the editors respond more efficiently.

___________________________________________

REVIEW SCOPE:

The scope of the review is the entire IEEE P802.3cu D1.0 Draft.

REVIEW OPEN: Tuesday Nov 26th, 2019

REVIEW CLOSE: Wednesday Dec 11th, 2019 AOE

-------------------------------------------------------------------------

HOW TO ACCESS THE DRAFT

The draft is posted for Task Force review purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

Draft 1.1 may be downloaded from:

URL:  http://www.ieee802.org/3/cu/private/8023cu_D1p1.pdf 

 

A comparison file between IEEE P802.3cu D1.0 and 1.1 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:

URL:  http://www.ieee802.org/3/cu/private/8023cu_D1p1_compare.pdf 

 

Please DO NOT submit comments against the above document.

 

 

Username: 802.3cu

Password: distributed at meetings – contact Chair (mnowell@xxxxxxxxx) if you need it.

(The 802.3 common username/password will work)

Please submit comments against the above draft.

  

_______________________________________

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E = Editorial

T = Technical

1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use either the comment tool or spreadsheet. A comment entry tutorial is available at http://www.ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p1.pdf.

a. Access the comment tool at the URL (last updated September 2015):

http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip

To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:

Comment_Tool_Generic_Solution.exe 

b. Access the comment spreadsheet at the URL:

http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls

c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail. Please use this method only if the previous two methods are not practical.

PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available.

 

Please use one of the comment tools above if possible.

 

------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

CommentID: (Leave Blank)

CommenterName:

CommenterEmail:

CommenterPhone:

CommenterCellPhone:

CommenterCompany:

Clause:

Subclause:

Page:

Line:

CommentType: (E, or T)

Comment:

CommentEnd:

SuggestedRemedy:

RemedyEnd:

--------------------end comment template------------------

2. Send your comments to:mnowell@xxxxxxxxx and gnicholl@xxxxxxxxx

and paste into the subject line: IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force Review  D1.1 comments

This can be done with this link: mailto:gnicholl@xxxxxxxxx?cc=mnowell@xxxxxxxxx&subject=IEEE P802.3cu 100Gb/s and 400Gb/s over SMF at 100Gb/s per Wavelength Task Force Review D1.1 comments  

____________________________________________________________

Thank you for your participation in this review and careful review of the draft.

 

Mark Nowell, Chair, IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force

Email: mnowell@xxxxxxxxx

 

Gary Nicholl, Chief Editor, IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force

Email: gnicholl@xxxxxxxxx

 

 

 


To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1