| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Dear Colleagues, A few reminders for the P802.3cu Task Force: - D2.1 recirculation ballot is currently open. Deadline for voting and comments is this Sunday 5/10 AOE. See below for details - Our next Interim Teleconference is Tues 5/19. Per our usual deadlines, I'm requesting that presentation requests be submitted to me by Thurs 5/14 with the actual presentation sent to me on the Friday 5/15 for posting. It is assumed
that presentations would be in support of any submitted comments - Not really needing a reminder right now and the notice just went out but in case you missed it, please see the
call for joining the P802.3cu SA Ballot pool Regards, Mark On 2020-04-27, 7:48 AM, "Mark Nowell (mnowell)" <00000b59be7040a9-dmarc-request@xxxxxxxxxxxxxxxxx> wrote: Dear Task Force Participants, With this e-mail, I'd like to announce the start of the IEEE P802.3cu/D2.1 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Working Group 1st recirculation ballot. Open date: Saturday 25th April 2020 Close date: Sunday 10th May 2020 23:59 AOE As stated in the attached announcement, the ballot group for this draft is the IEEE 802.3 voting membership as of Tuesday 28th January 2020. All comments received before the close of ballot will be considered, the one limitation
however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot. Best regards, Mark Nowell Chair, IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force ----- Dear Colleagues, This is the announcement of the electronic IEEE 802.3 Working Group 1st recirculation ballot on the amendment IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength. Remember that voting, as well as attendance,
is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions
below to ensure you are using the most up to date tools. The ballot group for this draft is the IEEE 802.3 voting membership as of Tuesday 28th January 2020. Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed,
the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot. BALLOT SCOPE: During this IEEE 802.3 Working Group 1st recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3cu/D2.0 and IEEE P802.3cu/D2.1 and the unsatisfied negative comments. CRITERIA FOR STANDARDS DEVELOPMENT: One of the responsibilities as a balloter is to ensure that draft is consistent with the criteria for standards development (CSD) responses which are available at <https://mentor.ieee.org/802-ec/dcn/19/ec-19-0062-00-ACSD-p802-3cu.pdf>.
An Approve vote indicates your agreement that the draft is consistent with the CSD responses. BALLOT OPEN: Saturday 25th April 2020 BALLOT CLOSE: Sunday 10th May 2020 23:59 AOE The Project Authorization Request for this Amendment is available at <http://ieee802.org/3/cu/P802_3cu_PAR.pdf> and includes the following: TITLE: Standard for Ethernet Amendment: Physical Layers and Management Parameters for 100 Gb/s and 400 Gb/s Operation over Single-Mode Fiber at 100 Gb/s per Wavelength SCOPE OF PROJECT: This project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add PHY specifications and Management Parameters for 100 Gb/s and 400 Gb/s Ethernet optical interfaces for reaches up to 10 km based on
100 Gb/s per wavelength optical signaling NEED FOR THE PROJECT: The continual growth of bandwidth demand has driven evolution of higher Ethernet speeds, including 100 Gb/s and 400 Gb/s Ethernet. To meet this growth, ongoing advancement in optical technology enables the opportunity to develop
higher density or lower cost optical interfaces using 100 Gb/s per wavelength optical signaling with greater than 500 m reach. Thank you for your participation in this ballot and careful review of the draft. David Law Chair, IEEE 802.3 Ethernet Working Group Phone: +44 1631 563729 Email: david_law@xxxxxxxx Mark Nowell Chair, IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength Task Force Phone: +1 613 852 7290 Email: mnowell@xxxxxxxxx ---------------------------------------------------------------- INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3cu draft D2.1 Instructions for accessing the ballot documents, casting your ballot and submitting comments follow. HOW TO ACCESS THE DRAFT The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights. The IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength draft D2.1 may be downloaded from: URL: <http://www.ieee802.org/3/cu/private/8023cu_D2p1.pdf> Username: [IEEE 802.3 or IEEE P802.3cu username] Password: [IEEE 802.3 or IEEE P802.3cu password] Please submit comments against the above draft. A comparison file between IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength draft D2.0 and D2.1 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This
draft may be downloaded from: <http://www.ieee802.org/3/cu/private/8023cu_D2p1_compare.pdf> Please DO NOT submit comments against the above document. Unsatisfied negative comments, and their dispositions may be downloaded from: <http://www.ieee802.org/3/cu/comments/8023cu_D20_comment_unsatisfied_by_ID.pdf> All comments, and their dispositions, from the initial ballot may be downloaded from: <http://www.ieee802.org/3/cu/comments/8023cu_D20_final_comment_responses_by_clause.pdf> These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from: <http://www.adobe.com/prodindex/acrobat/readstep.html> HOW TO CAST YOUR BALLOT To assure your ballot is counted, please: 1) Send your ballot to: stds-802-3-ballot@xxxxxxxx 2) Paste the following line into the subject field: IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength D2.1 ballot This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3cu%20100%20Gb/s%20and%20400%20Gb/s%20over%20SMF%20at%20100%20Gb/s%20per%20Wavelength%20D2.1%20ballot> 3) Paste into the message body and complete the ballot form below: -----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength D2.1 ballot Your Name:___________________________ ___ APPROVE ALL WITHOUT COMMENT ___ APPROVE ALL WITH COMMENTS on SOME (All comments are non-binding) ___ DISAPPROVE (Some or all comments are binding; a voter must submit specific comments for remedy) ___ ABSTAIN, Lack of Expertise ___ ABSTAIN, Lack of Time -----------------------end ballot form-------------------- HOW TO SUBMIT COMMENTS Acceptable comment types: E = Editorial ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) 1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use the spreadsheet. A comment entry tutorial is available at:
<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf> a. Access the comment spreadsheet at the URL: <http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls> b. Access the comment tool at the URL: <http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip> To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is: Comment_Tool_Generic_Solution.exe c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an
ASCII text file or as part of your e-mail. PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above
if possible. ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, ER, T, or TR) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end comment template------------------ 2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line: IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength D2.1 comments This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3cu%20100%20Gb/s%20and%20400%20Gb/s%20over%20SMF%20at%20100%20Gb/s%20per%20Wavelength%20D2.1%20comments> ________________________________________________________________________ To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1 To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1 |