Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Say you have set of s-parameters that include packages on both sides. Then you select the null package for transmitter and receiver. The die load would still be used. In the example, the null
package does include the die load but no package.
From: Stephens, Jeremy <00003357e55d7ada-dmarc-request@xxxxxxxxxxxxxxxxx>
[AMD Official Use Only - AMD Internal Distribution Only] Hi Rich, Can you clarify the recipe for deleting the package in the c2m xlsx you discussed today? I couldn't quite follow the discussion thanks Jeremy From: Lusted, Kent C <kent.c.lusted@xxxxxxxxx>
Colleagues, The COM ad hoc website was updated with the materials for tomorrow’s meeting. See:
https://www.ieee802.org/3/dj/public/adhoc/COM/index.html For review during the meeting, Rich Mellitz and Brandon Gore provided a 3dj C2M configuration sheet based on D1.0 comment resolution.
Note the short duration. Most of the (short) meeting time will be dedicated to code review and Q&A. Use of the electrical email reflector is strongly encouraged. I want to remind all teleconference meeting participants to review the following documents prior to participation in an IEEE 802.3 meeting teleconference:
All of these policies may be found at
http://ieee802.org/3/policies.html -Kent COM Ad hoc Chair, IEEE P802.3dj Task Force To unsubscribe from the STDS-802-3-B400G-ELEC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G-ELEC&A=1 To unsubscribe from the STDS-802-3-B400G-ELEC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G-ELEC&A=1 â?? To unsubscribe from the STDS-802-3-B400G-ELEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G-ELEC&A=1 |