Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [EFM-P2MP] RE: [EFM] T.V. broadcast / unicast




Hi Bob,

This is a bit of a tangent, but some things you said caught my eye.

I agree that CWDM optics is coming on fairly strong, especially in the
last year or so and solving problems of higher bandwidth data
transmission and supporting longer distances.

I'm puzzled by you comment about not using 802 protocol though. 802.3 is
probably the most cost effective protocol known to humans. EFM is an
802.3 effort. I suspect that most TV signals will be digital, which
means that Ethernet can carry them. I take it that you were thinking
that some TV channels would be analog? I suspect that this make the
whole enchilada premium in cost. 

Best Regards,
Rich
                                      
---------------------------------------------------------
Richard Taborek Sr.                     Intel Corporation
XAUI Sherpa                    Intel Communications Group
3101 Jay Street, Suite 110        Optical Group Marketing
Santa Clara, CA 95054           Santa Clara Design Center
408-496-3423                                     JAY1-101
Cell: 408-832-3957          mailto:rich.taborek@xxxxxxxxx
Fax: 408-486-9783                    http://www.intel.com

Bob Barrett wrote:
> 
> I think a lot of this depends on how the relative cost of CWDM optics
> develops over the next two-three years. It would be far simpler technically
> to put b'cast TV (and / or user selected TV channels) on a separate lambda
> (may be not using an 802 protocol). I thought that was why we are proposing
> to leave some of the lambda bands vacant.
> 
> I thought that the email from Ingvar was very informative.
> 
> 'Broadcasting' only the channels selected by users (probably from a
> selection system at the POP, not at the CO) is a change of system
> architecture from the traditional cable T.V. model. It also requires powered
> POPs. Powered POPs map well into the star / fan-out p2p systems (which maps
> into my positioning well, so I am in favour of it).
> 
> Best regards
> 
> Bob
> 
> -----Original Message-----
> From: owner-stds-802-3-efm@majordomo.ieee.org
> [mailto:owner-stds-802-3-efm@majordomo.ieee.org]On Behalf Of
> carlosal@xxxxxxxxxxxxxxxxxx
> Sent: 20 November 2001 19:55
> To: John Pickens
> Cc: Norman Finn; stds-802-3-efm@ieee.org; stds-802-3-efm-p2mp@ieee.org
> Subject: [EFM] Re: [EFM-P2MP] Point-to-Point plus Shared Media
> 
> Two comments:
> 
> 1) John Pickens said:
> 
> > I know there is a contingent within the working group that does not
> > consider it a requirement to access the single-copy-broadcast attribute
> of
> > the media, so probably we should poll this question at some point.
> 
> Although I'm the first to acknowledge that my opinion is *not*
> representative of all carriers (far from it :-), I can say that the
> single-copy-broadcast is one of the *great* potential advantages of using
> Ethernet PON in the access network. Of course, it all depends on whether
> will we be able to provide broadcast-based services such as digital video.
> 
> I believe that many carriers will be of the same opinion.
> 
> So my vote is already cast - single-copy-broadcasts are a requirement.
> 
> 2) Norman Finn's idea is really neat from a technical *and* political
> standpoint, as it sounds as a reasonable compromise between the two fields;
> however, I'm not sure that it's actually feasible in practice due to
> administrative reasons, as John pointed out. It is highly probable that
> most carriers will end up using only one of the modes.
> 
> [For instance, this already happened with DSL; almost nobody uses the two
> transmission modes of DMT modems (interleaved and fast). Although it is
> technically possible to use the two at the same time, almost everybody uses
> only the interleaved one, mainly because of the complexity, and also
> because of potential compatibility issues]
> 
> Anyway, just to explore the alternatives, we could deploy completely
> separate IP networks, each over a separate MAC address (of course this
> assume that we are going to run IP over Ethernet, but who bets otherwise?).
> Each IP network could 'opt' for some particular mode of operation.
> 
> p.s. There are also some security issues that we should analyze in this
> case; the two kinds of traffic would be received at every node, and this is
> could pose a different security problem. Not sure about it, just wondering.
> 
> Carlos Ribeiro
> CTBC Telecom