RE: [EFM] IEEE 802.3ah MIB?
Dan -
I'm interested in helping this work go forward. Me, or someone else from my company, will help out.
- Matt
> -----Original Message-----
> From: Romascanu, Dan (Dan) [mailto:dromasca@avaya.com]
> Sent: Monday, June 30, 2003 10:40 AM
> To: Bemmel, Vincent; hubmib@ietf.org
> Cc: stds-802-3-efm@ieee.org
> Subject: RE: [EFM] IEEE 802.3ah MIB?
>
>
>
> Up to this point we have two volunteers for participating in
> a possible 802.3ah MIB work - one for copper, and one for
> EPON. We have also noted the interest expressed by the Chair
> of the IEEE 802.3ah - Howard Frazier. This is promising, but
> still, IMO, under the threshold of interest required for
> starting new work in the IETF Ethernet Interfaces and Hub MIB WG.
>
> If you and/or your sponsoring company are interested in
> participating in this work and/or implementing a future
> standard EFM MIB (whatever flavor of EFM) in your products -
> please send an e-mail to hubmib@ietf.org.
>
> Thanks,
>
> Dan
>
> Dan Romascanu,
> Chair, IETF Ethernet Interfaces and Hub MIB WG
>
>
>
> > -----Original Message-----
> > From: Bemmel, Vincent [mailto:vincent.bemmel@Alloptic.com]
> > Sent: 30 June, 2003 5:39 AM
> > To: Romascanu, Dan (Dan); 'hubmib@ietf.org'
> > Subject: RE: [EFM] IEEE 802.3ah MIB?
> >
> >
> > Dan,
> >
> > I would like to co-edit the EPON MIB. This will include
> > seperate MIBs for
> > the OLT and the ONU with associated services.
> >
> > I hope we can show enough interest to get this work started asap.
> >
> > Regards,
> >
> > Vincent Bemmel
> > Alloptic
> > http://www.alloptic.com
> >
> > > Dan,
> > >
> > >I'm interested to become a co-editor of the 802.3ah MIB.
> > >My company specializes in Aggregated Copper EFM systems
> > >(currently long reach - 2BaseTL).
> > >
> > >Regards,
> > >-Edward Beili
> > > Senior System Engineer
> > > Actelis Networks
> > >
> ...
>
>