RE: [EFM] IEEE 802.3ah MIB?
Dan,
I'm interested in promoting this activity.
Me or someone from my company will participate.
Ariel
Ariel Maislos
Passave Inc.
1557 Jasper Dr.
Sunnyvale, CA 94087
ariel.maislos@passave.com
Tel: (408) 530 0458 Cel: (408) 242 8599
-----Original Message-----
From: owner-stds-802-3-efm@majordomo.ieee.org
[mailto:owner-stds-802-3-efm@majordomo.ieee.org] On Behalf Of Romascanu, Dan
(Dan)
Sent: Monday, June 30, 2003 7:40 AM
To: Bemmel, Vincent; hubmib@ietf.org
Cc: stds-802-3-efm@ieee.org
Up to this point we have two volunteers for participating in a possible
802.3ah MIB work - one for copper, and one for EPON. We have also noted the
interest expressed by the Chair of the IEEE 802.3ah - Howard Frazier. This
is promising, but still, IMO, under the threshold of interest required for
starting new work in the IETF Ethernet Interfaces and Hub MIB WG.
If you and/or your sponsoring company are interested in participating in
this work and/or implementing a future standard EFM MIB (whatever flavor of
EFM) in your products - please send an e-mail to hubmib@ietf.org.
Thanks,
Dan
Dan Romascanu,
Chair, IETF Ethernet Interfaces and Hub MIB WG
> -----Original Message-----
> From: Bemmel, Vincent [mailto:vincent.bemmel@Alloptic.com]
> Sent: 30 June, 2003 5:39 AM
> To: Romascanu, Dan (Dan); 'hubmib@ietf.org'
> Subject: RE: [EFM] IEEE 802.3ah MIB?
>
>
> Dan,
>
> I would like to co-edit the EPON MIB. This will include
> seperate MIBs for
> the OLT and the ONU with associated services.
>
> I hope we can show enough interest to get this work started asap.
>
> Regards,
>
> Vincent Bemmel
> Alloptic
> http://www.alloptic.com
>
> > Dan,
> >
> >I'm interested to become a co-editor of the 802.3ah MIB.
> >My company specializes in Aggregated Copper EFM systems
> >(currently long reach - 2BaseTL).
> >
> >Regards,
> >-Edward Beili
> > Senior System Engineer
> > Actelis Networks
> >