Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_DIALOG] [EXTERNAL]--Re: [802.3_DIALOG] David Chalupsky



I, too, was shocked at Dave’s passing.

Maybe it is because I have travelled my whole career but I view all of the standards groups as my extended family. And when we lose someone, it really is like losing a family member. We have lost too many, too young and it hurts.

While Dave and I did not hang out on a regular basis, I always found him fun and full of life. I did meet up with him at an off-beat bar in Salt Lake City and again at another off-beat bar in Geneva.

He will be missed by all.

Steve Swanson

Sent from my personal assistant

On Aug 28, 2020, at 7:50 PM, Ali Ghiasi <aghiasi@xxxxxxxxx> wrote:

 Hello Colleagues,

David Chalupsky sudden passing away is shocking and saddening!

I recall David being a well respected and a major contributor to 2.5GBAST, 5.0GBASET, 10GBASE-T, 25HBASE-T, 25 GbE, and 100G Backplane Ethernet as well as Ethernet Alliance.

David will be missed!

Thanks,
Ali Ghiasi


On Aug 28, 2020, at 12:19 PM, Law, David <dlaw@xxxxxxx<mailto:dlaw@xxxxxxx>> wrote:

Dear Colleagues,

I am very saddened to inform you that David Chalupsky has passed away. David was a long-term contributor, as well as Study Group and Task Force Chair, within IEEE 802.3 particularly in the areas of BASE-T and higher speed Ethernet standards. He will be greatly missed.

Regards,
David

________________________________________________________________________
To unsubscribe from the STDS-802-3-DIALOG list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-DIALOG&A=1

________________________________

To unsubscribe from the STDS-802-3-DIALOG list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-DIALOG&A=1

________________________________________________________________________
To unsubscribe from the STDS-802-3-DIALOG list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-DIALOG&A=1