Re: [STDS-802-3-EPOC] Question on FER Objective
Steve,
"Marek" is close enough I guess J
Typically, we use BER for objectives in 802.3, or at least all recent
projects I had pleasure participating in used BER in objectives. If you are
interested in how one BER is recalculated into FER (and vice versa), I would
suggest looking into standard 802 (which is under Sponsor ballot at this
time), subclause 6.3 (Error ratios).
Marek
From: Shellhammer, Steve [mailto:sshellha@xxxxxxxxxxxxxxxx]
Sent: Wednesday, 30 January, 2013 6:40 PM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3-EPOC] Question on FER Objective
Mark, et. al.,
In our Objectives it says we have a frame error ratio (rate)
of 10^-6 on the downstream and 5x10^-5 on the upstream,
http://grouper.ieee.org/groups/802/3/bn/EPoC_objectives_update_1115.pdf
In 802.3 what frame size is used in this objective?
Thanks,
Steve
_____
________________________________________________________________________
To unsubscribe from the STDS-802-3-EPOC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1